Preparation Before Sewing; Installing The Needle; Winding The Lower Thread - Brother KE-430HX Instruction Manual

4. PREPARATION BEFORE SEWING

4-1. Installing the needle

Turn off the power switch before installing the needle, otherwise the machine may operate if the foot switch is depressed
by mistake, which could result in injury.

4-2. Winding the lower thread

Do not touch any of the moving parts or press any objects against the machine while winding the lower thread, as this may
result in personal injury or damage to the machine.
CAUTION
1. Loosen the set screw (1).
2. Insert the needle (2) in a straight line as far as it will go,
3880B
CAUTION
1. First, press the bobbin key
KE-430HX/KE-430HS, BE-438HX/BE-438HS
4. PREPARATION BEFORE SEWING
making sure that the long groove on the needle is at the
front, and then securely tighten the set screw (1).
panel to switch to the bobbin screen.
on the home screen
31