Table of Contents
Advertisement
Operator
Green and yellow wire
(ground wire)
KE-430HX/KE-430HS, BE-438HX/BE-438HS
<100 V / 400 V system>
(1) Power switch
(2) Wood screws [2 pcs]
4145M
(3) Transformer box
3954B
(4) Transformer box plates [2 pcs]
(5) Screws [with washer] [4 pcs]
(6) 3-pin power supply connector
(7) Staples [5 pcs]
(8) Cord clamps [2 pcs]
(9) Power cord
1. Attach an appropriate plug to the
power cord (9). (The green and yellow
wire is the ground wire.)
2. Insert
the
power
properly-grounded electrical outlet.
* The inside of the control box uses
single-phase power.
NOTE:
• If the ground connection is not secure,
electric shocks, operating errors or
damage to electronic components such
as P.C. boards may occur.
• Take care when tapping in the five
staples (7) to make sure that they do
not pierce the cords.
• Do not use extension cords, otherwise
machine
operation
result.
3960B
3. INSTALLATION
plug
into
a
problems
may
29
Hide quick links:
Advertisement
Table of Contents
