Installing The Machine Head - Brother KE-430HX Instruction Manual

3-4. Installing the machine head

Pulse motor
Approx. 20mm
Approx. 20mm
KE-430HX/KE-430HS, BE-438HX/BE-438HS
(1) Pins [2 pcs]
(2) Set screws [2 pcs]
(3) Rubber cushion assembly [2 pcs]
Place the machine head gently on top of
the table.
NOTE:
• Be careful not to clamp any cords
between the machine head and the
table.
• When holding the machine head, do
not hold it by the pulse motor, otherwise
it may damage the pulse motor.
3860B
Pull the seal (4) in the direction of the
arrow to remove it.
3963B
3. INSTALLATION
15