Work Clamp Height Setting Method - Brother KE-430HX Instruction Manual

5-6. Work clamp height setting method

The work clamp height is always displayed on the home screen during sewing standby mode, and it can be changed at any time.
If the work clamp height is changed, the same change will be applied to all programs.
(3)
It is possible to change the value of intermediate work clamp height (L) only when memory switch No. 071 is set to "2" or memory
switch No. 072 is set to "2" or "5".
If you would like to change the work clamp height separately for each program, set memory switch No. 470 to "ON".
* Initial value differs depending on the sewing machine model.
Maximum work clamp height: 430HX/HS: 14, 438HX/HS: 10
Intermediate work clamp height: 430HX/HS: 1, 438HX/HS: 1
(4)
(1)
(2)
KE-430HX/KE-430HS, BE-438HX/BE-438HS
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
1. Touch the work clamp height value on the home screen to
switch to the work clamp height setting screen.
2. Touch the setting value to be changed depending on whether
the item to be edited is the maximum height "H:" (2) or the
intermediate height "L:" (3). The value for the selected item to
be edited will be highlighted.
3. Touch the or
clamp height (2) or (3).
4. Touch the reset key
5. Touch the OK key
6. When the settings have been completed, touch the back key
or home key
screen.
・ When the OK key is touched, the work clamp height
value which is set will be applied from the next time
sewing is carried out.
key (1) to change the work
(4) to set the initial value (*1).
to confirm the value.
to switch to the home
49