Brother KE-430HX Instruction Manual page 62

5. USING THE OPERATION PANEL (BASIC OPERATIONS)
<List of items>
Item Setting range and initial value
Standard programs and additional programs
which have already been registered can be
selected.
Touch the tabs at the top of the screen to switch
between the standard program and additional
program lists.
・ Standard program
[Program No.S001 to S089
Pattern
(S001 to S064 for the 438HX/HS)]
・ Additional program
[Program numbers A001 to A500]
(These are programs which have been
added to memory from an external USB
source or by using the program copy
function.)
* If there are no additional programs which
have been registered, there will be no
response when this tab is touched.
20% - 200%
(Limited by available sewing area.)
(Initial value is 100%.)
X scale
* The setting can be displayed in "mm" units
by setting memory switch No.402 to "ON".
20% - 200%
(Limited by available sewing area.)
(Initial value is 100%.)
Y scale
* The setting can be displayed in "mm" units
by setting memory switch No.402 to "ON".
430HX/HS:
200 sti/min to 3,300 sti/min
438HX/HS:
200 sti/min to 2,800 sti/min
The setting is in units of 100 sti/min.
Sewing
speed
(Initial value:
2,700 sti/min for the 430HX/HS
2,300 sti/min for the 438HX/HS)
52
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Display
Initial value
Initial value
Initial value