Download  Print this page

Preparation Before Sewing; Needles And Threads; Installing The Needles - Brother DA-927A Instruction Manual

Twin needle / three needle feed off the arm double chain stitcher.
Hide thumbs

Advertisement

5. PREPARATION BEFORE SEWING

5. PREPARATION BEFORE SEWING

5-1. Needles and threads

The needle and threads to be used vary depending on sewing conditions. Select the correct ones by referring to the table below.
Needle count
TV x 64#12 (Organ)
TV x 5#80 (SCHMETZ)
TV x 64#14 (Organ)
TV x 5#90 (SCHMETZ)
TV x 64#16 (Organ)
TV x 5#100 (SCHMETZ)
TV x 64#21(Organ)
TV x 5#130 (SCHMETZ)
TV x 64#22(Organ)
TV x 5#140 (SCHMETZ)

5-2. Installing the needles

Turn off the power switch before installing the needle.
However, the motor will keep turning even after the power is switched off as a result of the motor's inertia. Wait until the
motor stops fully before starting work.
The machine may operate if the treadle is depressed by mistake, which may result in injury.
11
Upper thread
Spun yarn #60
Spun yarn #60
Spun yarn #50
Spun yarn #30
Spun yarn #20
CAUTION
1. Turn the machine pulley until needle clamp (1) is raised to the
highest position.
2. Loosen the three set screws (2), hold the three needles (3)
with their long grooved side facing front, insert them into the
needle clamp (1) all the way, and fasten the needle with the
three set screws (2).
4259B
DA-927A, DA-928A
Thread
Lower thread
Spun yarn #80
Spun yarn #60
Spun yarn #50
Spun yarn #30
Spun yarn #30

Advertisement

Table of Contents

   Related Manuals for Brother DA-927A

This manual is also suitable for:

Da-928a

Comments to this Manuals

Symbols: 0
Latest comments: