Download  Print this page

Preparation Before Sewing; Needles And Threads; Installing The Needles - Brother DA-9280 Manual

Three needle (twin needle) feed off the arm double chain stitch
Hide thumbs

Advertisement

6. PREPARATION BEFORE SEWING

6. PREPARATION BEFORE SEWING

6-1. Needles and threads

The needle and threads to be used vary depending on sewing conditions. Select the correct ones by referring to the table below.
Needle TV×5
SCHMETZ Nm130
(Organ Needle #21)
SCHMETZ Nm140
(Organ Needle #22)

6-2. Installing the needles

Turn off the power switch before installing the needle.
However, the motor will keep turning even after the power is switched off as a result of the motor's inertia. Wait until the
motor stops fully before starting work.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
11
Thread
Upper thread
spun yarn #30
spun yarn #20
CAUTION
1. Turn the machine pulley until needle clamp (1) is raised to
the highest position.
2. Loosen the three set screws (2), hold the three needles (3)
with their long grooved side facing front, insert them into the
needle clamp (1) all the way, and fasten the needle with the
three set screws (2).
1484B
DA-9280
Lower thread
spun yarn #30
spun yarn #30

Advertisement

Table of Contents
loading

  Related Manuals for Brother DA-9280