Table Processing Diagram - Brother KE-430HX Instruction Manual

3-1. Table processing diagram

• The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and vibration of the sewing
machine.
• Check that the control box is at least 10 mm away from the leg. If the control box and the leg are too close together, it may result in
incorrect sewing machine operation.
Oiler hole
Hinge holder hole
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Control box
mounting hole
Cord hole
Operation panel
cord hole
3. INSTALLATION
Cotton
stand hole
3858B
13