Table of Contents
Advertisement
Approx.
165ml
6. Remove the screw (5).
7. Pour in oil through the hole where the screw (5) was
installed.
*
Add approximately 165 ml of oil.
NOTE:
・Check that the oil level reaches in between the two reference
lines in the oil gauge window. If the oil level is below the lower
reference line, operating problems such as motor seizure may
result.
・ Do not allow the oil level to go past the top reference line. Oil
leaks may occur during sewing machine operation.
3922B
8. Install the screw (5).
*
Clean around the installation area before installing.
*
When installing the screw (5), check that the O-ring (6) is
fitted onto it.
3923B
KE-430HX/KE-430HS, BE-438HX/BE-438HS
8. MAINTENANCE
79
Hide quick links:
Advertisement
Table of Contents
