Table of Contents
Advertisement
3. INSTALLATION
<Main P. C. board>
X pulse motor encoder [6-pin] White
Y pulse motor encoder [6-pin] Red
Work clamp pulse motor encoder [6-pin] Black
Thread trimmer pulse motor encoder [5-pin] Blue
Machine head switch [3-pin]
Machine head memory [6-pin]
Digital tension [4-pin] (KE-430HX/BE-438HX)
Tension release solenoid [4-pin]
(KE-430HS/BE-438HS)
Thread trimmer pulse motor [4-pin] Blue
LED [2-pin]
Operation panel [10-pin]
22
Lock the cord clamp
securely.
Connectors
KE-430HX/KE-430HS, BE-438HX/BE-438HS
* Secure the cords so that they
have enough room for
movement as shown in the
illustration.
<Removal>
Press
the tab.
Connection location on
main P. C. board
P2 (X-ENC)
P3 (Y-ENC)
P6 (P-ENC)
P7 (T-ENC)
P9 (HEAD-SW)
P4 (HEAD-MEM)
P19 (SOL2)
P24 (TPM)
P1 (LED)
P5 (PANEL)
<Securing>
3871B
Cord clamp /
cable tie
(2)
(2)
(2)
(2)
(2)
(2)
(1), (2), (3)
(1), (2)
(1), (2)
(2)
(2)
(Continued on next page.)
Hide quick links:
Advertisement
Table of Contents
