Table of Contents
Advertisement
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
4
Switch to the select program screen.
5
Select a program.
6
Repeat steps 3 to 5 above to register step 2 and subsequent steps in the same way.
・ If you would like to insert a new step in between
two existing steps
7
End cycle program setting mode.
8
If you would like to continue setting another cycle program, repeat steps 2 to 7 above.
68
Once a step has been selected and a check mark
appears, touch the step select key
・ The display will switch to the select user program
(4)
・ The user programs which have been registered will be
Touch the user program which has been registered as a
step to select it from the list.
・ The display will switch to the cycle program edit screen
If two or more steps are registered and you would like to
insert a new step in between two already-registered
steps, add check marks to the two existing steps to select
them, and then touch the step select key
・ The selected user program will be registered in
Touch the OK
・ The display will return to the select cycle program
This completes the registering of cycle programs.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
screen.
set in the selected step.
and the selected program will be registered in the
selected step.
between the two selected steps at this time.
key.
screen.
(4).
.
Hide quick links:
Advertisement
Table of Contents
