Using The Production Counter - Brother KE-430HX Instruction Manual

6-4. Using the production counter

<Setting the counter value>
1 Switch to production counter setting mode.
2 Change the counter value.
(3)
3 Apply the changed parameter setting.
<Production counter operation>
The production counter is always operating.
・ The counter value displayed in the home screen is incremented by 1 each time one sewing operation is completed.
* The lower 5 digits are displayed in the home screen. If you would like all digits to be displayed, check using the production
counter setting screen.
(1)
(4)
(2)
KE-430HX/KE-430HS, BE-438HX/BE-438HS
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
From the setting menu screen
Press the menu key to switch to the setting menu screen,
and then touch "Production counter setting" in the menu.
From the home screen
At the home screen, you can also touch the production
counter icon
・ The 7 digits of current counter value will be displayed.
Touch the
counter value (3).
・ The counter value can be set from "0000000" to
"9999999".
・ If you press the reset key
mode, the value will become "0000000".
Touch the OK
・ The value will be applied and the display will return to
the menu (*1).
・ If you touch the back key
OK key, you can cancel the parameter changes.
*1 If you have switched from the home screen, the display
will return to the home screen.
(1) to switch the screen.
key or the key (2) to change the
(4) during setting
key.
without touching the
65