Table of Contents
Advertisement
3
Change the memory switch parameters.
When checking detailed explanations of memory switches
You can touch the check
selected.
(8)
4
Apply the changed parameter setting.
5
Repeat steps 2 to 4 above to set each memory switch.
6
Exit setting mode.
(7)
(5)
(6)
key (8) to check the detailed explanation of the memory switch which is currently
(9)
KE-430HX/KE-430HS, BE-438HX/BE-438HS
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
Touch the
setting value (6).
・ If the setting value has not been confirmed, the display will
blink.
・ You can make the initial setting appear in the display by
touching the reset key
Touch the OK key
・The setting value (9) will stop blinking and illuminate, and
this means that the parameter setting is confirmed.
・If you change the memory switch number or touch the
menu key
the screen without touching the OK key, you can cancel
the changes.
Touch the back key or the menu key.
・ The display will return to the setting menu screen.
key or the
key (5) to change the
(7).
.
or the return key
to switch
61
Hide quick links:
Advertisement
Table of Contents
