Brother KE-430HX Instruction Manual page 33

Connectors
Work clamp pulse motor [6-pin] Black
Y pulse motor [6-pin] Red
X pulse motor [6-pin] White
Synchronizer [16-pin]
Upper shaft motor [4-pin]
6. Close the cord presser plate (7) in the direction of the white
7. Check that the cords do not get pulled, and then gently return
3873B
8. Use the five screws (9) to tighten the cover (8) of the control
3912B
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Insertion point
arrow, and secure it by tightening the two screws (6).
NOTE:
Close the cord presser plate (7) securely so that no foreign
objects, insects or small animals can get inside the control
box.
the machine head to its original position.
box.
Check that none of the cords are being clamped by the cover
at this time.
3. INSTALLATION
3872B
(1)
(2)
(3)
(4)
(5)
23