Download Print this page

Preparation Before Sewing; Installing The Needle; 2-Pedal Foot Switch Operation Method - Brother BAS-341H Instruction Manual

Direct drive programmable electronic pattern sewer
Hide thumbs

Advertisement

4. PREPARATION BEFORE SEWING

4. PREPARATION BEFORE SEWING

4-1. Installing the needle

Turn off the power switch before installing the needle.
If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result.

4-2. 2-pedal foot switch operation method

Work clamp switch
Start switch
23
CAUTION
1. Loosen the set screw (1).
2. Insert the needle (2) in a straight line as far as it will go,
making sure that the long groove on the needle is at the
front, and then securely tighten the set screw (1).
3475B
When the work clamp switch (left side) is depressed, the
3991M
intermittent presser foot (1) and the work clamp (2) are
lowered, and when the start switch (right side) is then
depressed, the sewing machine starts operating.
.
3502B
BAS-341H, BAS-342H

Advertisement

loading

  Also See for Brother BAS-341H

  Related Manuals for Brother BAS-341H

This manual is also suitable for:

Bas-342h