Table of Contents
Advertisement
7. SEWING
7. SEWING
Attach all safety devices before using the sewing machine.
If the machine is used without these devices attached, injury may result.
Turn off the power switch at the following times. The machine may operate if the foot switch is depressed by mistake,
which could result in injury.
When replacing the bobbin and needle
When not using the machine and when leaving the machine unattended
Use threading mode or turn off the power first in order to carry out threading.
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in
personal injury or damage to the machine.
Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your
feet or cause other injuries.
Use both hands to hold the machine head when tilting it back or returning it to its original position.
If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get
caught.
7-1. Sewing
1st step
2nd step
72
CAUTION
1.
(1)
2. Press the change program No. key
3. Depress the foot switch to the 2nd step.
4441Q
4. Set the material under the work clamp (2).
5. Depress the foot switch to the 1st step.
6. Depress the foot switch to the 2nd step.
3888B
7. Once sewing is completed and the thread has been
3889B
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Turn on the power switch.
select the number for the program to be sewn.
The home position detection 1st will be carried out.
(For the BE-438HX/HS insert a button and place the
material under the button clamp (3). (Refer to "4-8.
Inserting a button".)
The work clamp (2) / button clamp (3) will be lowered.
The sewing machine will start sewing.
trimmed, the work clamp (2) / button clamp (3) will rise.
or
(1) to
Hide quick links:
Advertisement
Table of Contents
