Download  Print this page

Thread Tension; Lower Thread Tension - Brother KE-430HX Instruction Manual

Electronic direct drive lockstitch bar tacker, electronic direct drive lockstitch button sewer.
Hide thumbs

Advertisement

<Threading mode>
Threading mode is safe because the sewing machine will not start even when the foot switch is depressed.
1
2
3
Threading the thread.
Ending threading mode
4

4-5. Thread tension

4-5-1. Lower thread tension

Turn off the power switch before removing or inserting the bobbin case.
The machine may operate if the foot switch is depressed by mistake, which could result in injury.
weaker
CAUTION
stronger
2536Q
KE-430HX/KE-430HS, BE-438HX/BE-438HS
4. PREPARATION BEFORE SEWING
Turn on the power switch.
Press the thread key.
• The work clamp / button clamp will lower.
Press the thread key.
• The work clamp / button clamp will return to where it was
before threading mode was started.
Adjust the thread tension to the weakest possible tension by
turning the thread tension nut (1) until the bobbin case will
not drop by its own weight while the thread end coming out
of the bobbin case is held.
4421Q
35

Advertisement

Table of Contents

   Also See for Brother KE-430HX

   Related Manuals for Brother KE-430HX

This manual is also suitable for:

Be-438hxBe-438hsKe-430hs

Comments to this Manuals

Symbols: 0
Latest comments: