Copying Programs (Additional Program) - Brother KE-430HX Instruction Manual

5-9. Copying programs (Additional program)

If you would like to reuse an existing program which has almost exactly the same parameters, but change only the necessary
parts, you can copy the existing program and register the copy as a new additional program.
1 Switch to the copy program screen.
2 Select the copy destination program.
3 Select the copy source program.
4 Copy the program.
(1)
5 Change the necessary items.
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
Touch the menu key to switch to the setting menu screen.
Touch "Copy program" in the menu to switch to the copy
program screen.
When you touch the program number at the bottom of the
copy program screen, the screen switches to the list for
selecting the copy destination program number.
Select from the list to change the copy destination
program number.
・Select from additional program numbers A001 to A500.
・When a program number is selected, the display will
・The destination program number for copying will blink.
Select from the list to change the number of the standard
program or additional program to be copied.
・When a program number is selected, the display will
Touch the OK key.
・All items in the program will be copied, and the copy
Carry out the steps in "5-4. X scale and Y scale setting
method", "5-5. Sewing speed setting method" and "5-6.
Work clamp height setting method" and change the
necessary items.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
switch immediately to the copy program screen.
switch immediately to the copy program screen.
destination program number (1) will stop blinking.
55