Selecting The Technological Unit Of The Technology Controller; Setting The Motor Standard, System Of Units And Technology Unit Using Starter - Siemens SINAMICS G120C USS/MB Operating Instructions Manual

6.14.3

Selecting the technological unit of the technology controller

Options when selecting the technological unit
p0595 defines in which technological unit the input and output variables of the technology
controller are calculated, e.g. [bar], [m³/min] or [kg/h]. More information on this topic is provided
in the List Manual.
Reference variable
p0596 defines the reference variable of the technological unit for the technology controller.
Unit group
Parameters involved with p0595 belong to unit group 9_1.
More information on this topic is provided in the List Manual.
Special features
You must optimize the technology controller after changing p0595 or p0596.
6.14.4

Setting the motor standard, system of units and technology unit using STARTER

Precondition
STARTER must be in the offline mode to switch over the units.
Select the online mode or the offline mode us‐
ing the adjacent buttons.
STARTER indicates whether you change the settings online in the converter or offline in the
PC:
SINAMICS G120C converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
Overview of the manuals (Page 459)
/ .
Advanced commissioning
6.14 Selecting physical units
213