Siemens SINAMICS G120C USS/MB Operating Instructions Manual page 99

Default setting 20: "3-wire (enable/on/reverse)"
DO 0: p0730, DO 1:
p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in the BOP-2: 3-wIrE 2
Default setting 21: "USS fieldbus"
DO 0: p0730, DO 1: p0731
Speed setpoint (main setpoint): p1070[0] = 2050[1]
Designation in the BOP-2: FB USS
SINAMICS G120C converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
4.9 Connecting the interfaces for the inverter control
AO 0: p0771[0] DI 0: r0722.0, ..., DI 4: r0722.4
AO 0: p0771[0]
Installing
AI 0: r0755[0]
DI 2: r0722.2
99