Siemens SINAMICS G120C USS/MB Operating Instructions Manual page 93

Default setting 5: "Conveyor systems with fieldbus and Basic Safety"
DO 0: p0730, DO 1: p0731
Speed setpoint (main setpoint): p1070[0] = 2050[1]
Designation in the BOP-2: coN Fb S
Default setting 7: "Fieldbus with data set switchover"
Factory setting for inverters with PROFIBUS or PROFINET interface
DO 0: p0730, DO 1: p0731
Speed setpoint (main setpoint): p1070[0] = 2050[1]
Jog 1 speed setpoint: p1058, factory setting: 150 rpm
Jog 2 speed setpoint: p1059, factory setting: -150 rpm
Designation in the BOP-2: FB cdS
SINAMICS G120C converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
4.9 Connecting the interfaces for the inverter control
AO 0: p0771[0]
AO 0: p0771[0]
Installing
DI 4: r0722.4, DI 5: r0722.5
DI 0: r0722.0, ..., DI 3: r0722.3
93