Viewing Partial Reports - NetSHIELD Branch PRO User Manual

In the final audit screen there are 51 total vulnerabilities present. Notice that the Status
column has disappeared and the Firewall/SmartSwitch Update column has been added
to the far right.
After the Sales Department audit finished, the SmartSwitch blocked the IPs showing high
vulnerabilities. (You specify the SmartSwitch blocking requirements when you create the audit in
the Audit Wizard; NetSHIELD no longer does Firewall blocking).
IP Address 192.168.254.64 in the illustration shows two high vulnerability items. This address
was blocked at SmartSwitch 192.168.254.23 on Unit 1, Port 12.
You can also specify SmartSwitch blocking requirements on the Network Access Control
Asset Detection System page. Blocking rules for this action are displayed on the Network

Access Control SmartSwitch Integration page.

Viewing Partial Reports

At times it may be helpful to view actual report data before an audit is fully completed – perhaps
to check how things are going, or to view the status of a particular asset.
Let's say you create an audit called Email Server. If you select Audits
the left menu, you will see it listed.

Click the Email Server Start button to begin the audit.
Ten Tara Boulevard, Suite 140
Nashua NH 03062


Manage Audits from
Copyright © 2017 SnoopWall, Inc.
Page | 84