Enabling Mac Spoof Alerting; Enabling Mac Spoof Blocking; Viewing Ads Configuration Settings; Preparing Your Network For Asset Detection - NetSHIELD Branch PRO User Manual

If MAC Spoof Alerting is enabled, NetSHIELD will send an alert when multiple IP addresses are
detected for a single MAC address.

Select NAC Configuration
to the Asset Detection System configuration screen.

Select the Enable MAC Spoof Alerting checkbox.
If MAC Spoof Blocking is enabled, SnoopWall NetSHIELD will initiate NetSHIELD blocking
when multiple IP addresses are detected for a single MAC address. All assets assigned to the
single MAC address will be blocked.

Select NAC Configuration
to the Asset Detection System configuration screen.

Select the Enable MAC Spoof Blocking checkbox.
To view the ADS configuration settings:

Select NAC Configuration
to the Asset Detection System configuration screen.
P
REPARING
Asset Detection discovers new devices (such as laptops or wireless routers) upon plug-in or
connection to the network. When new assets are detected, you can choose to have NetSHIELD
perform any of the following actions:

Quarantine and notify appropriate personnel upon detection of an untrusted asset

Send an email notification when a new system is detected

Audit the new system immediately

Block traffic to/from the new system at the SmartSwitch when vulnerabilities are detected.
Note: For SmartSwitch blocking to take effect, you must set up an interface to the
SmartSwitch.

Block traffic at the port or IP address level
Ten Tara Boulevard, Suite 140
Nashua NH 03062
E MAC S
NABLING

Asset Detection System from the left menu to go directly
E MAC S
NABLING

Asset Detection System from the left menu to go directly
V ADS C
IEWING ONFIGURATION

Asset Detection System from the left menu to go directly
Y N
OUR ETWORK FOR
A
POOF LERTING
B
POOF LOCKING
S
ETTINGS
A D
SSET ETECTION
Copyright © 2017 SnoopWall, Inc.
Page | 50