Choosing Ip Addresses From List - NetSHIELD Branch PRO User Manual

Weekly
Monthly
PostUpdate
NOTE: An audit set to Now runs each time you start it, then reverts to the
Inactive state.

Set the audit Start Time, if appropriate. (For an audit set to Now or PostUpdate frequency,
the time does not apply.)
Choose the Hour and Minute you want to schedule the audit to start, and then select the day
of the week, if appliacable, from the pull down menu. The day of the week selector will be
disabled for Now, Daily, and PostUpdate audits.
The fourth page of the Audit Wizard allows you to choose specific IP Addresses for auditing.
Information about your auditing capacity is shown at the top of the page, including:

Number of IP addresses your license allows you to audit (variable depending on which
appliance you own)

Number of IP addresses currently selected (IP addresses are selected when the box to the
left of their entry is checked)

Number of IP addresses already audited

Link to list of IPs audited so far and their status

Green (or alternate color, based on browser settings) box that flags Wireless Access Points
After NetSHIELD collects IP addresses on the network, it recognizes:

Wireless Access Points

Assets on the Safe List

Missing systems
Ten Tara Boulevard, Suite 140
Nashua NH 03062
Start Time fields to specify the time of day to begin the test. Any Day of
Week you set is ignored. Once activated, the audit runs every day at the
specified time.
Runs the audit at the same time each week as soon as it is activated. Use
the pull downs to select the Start Time and Day of Week. Once activated,
the audit runs every week at the specified time.
Runs the audit every month on the Day of Week and at the Start Time you
select as soon as it is activated. For example, if you select Monday, the
test will run on the next Monday in the current month, then on the first
Monday in succeeding months. Once activated, the audit runs every
month at the specified time.
Runs the audit immediately after a CVE update is downloaded. (Audit
immediately returns to Inactive status after completion and remains
Inactive until the next CVE update is downloaded.)
C IP A
HOOSING
F L
DDRESSES ROM IST
Copyright © 2017 SnoopWall, Inc.
Page | 74