You can manage all audits you create and save on the Manage Audits page. Here you may
start, stop, or delete audits depending on your daily needs. After you save an audit, SnoopWall
NetSHIELD automatically displays this page.
To get here at any time:
Select Audits
Manage Audits from the left menu.
The Manage Audits page displays all audits saved in the system as well as their audit/CVE test
parameters. The Status column shows the current state (Auditing, Inactive, or Scheduled) of
each audit.
The Manage Audits page gives an overview of audit parameters you set earlier.
The first column shows Audit Name. Each audit has its own row with Start, Stop, and Remove
(Command) buttons to the far right.
A Status column just to the left of the Command buttons indicates the audit's current condition.
The initial status of any audit is Inactive. Inactive audits do not run.
Starting an Audit
Click the Start command button in the audit row.
Ten Tara Boulevard, Suite 140
Nashua NH 03062
A
& M
CTIVATING
ANAGING
S
CHEDULING AN
A
UDITS
A
R
UDIT TO
UN
Copyright © 2017 SnoopWall, Inc.
Page | 76