Managing Appliances; Adding Managed Appliances - NetSHIELD Branch PRO User Manual

Important Note: Intermediate devices, such as firewalls, must be configured to
allow traffic from SnoopWall Command Center to each remote, managed
appliance. Please consult your firewall documentation for more information on
port/traffic forwarding.
To accomplish all this, you will first need to add the appliances that will be managed remotely,
and then arrange them into groups.
Select Command Center
Appliance page displays a list of SnoopWall NetSHIELD appliances (see table below).

Select Command Center

This takes you to the Appliance Information screen. Fields with a red asterisk are
required: Appliance Name, URL, and Serial Number.

Enter appliance information.
If you enter the username and password for the appliance, you will not be asked for that
information when you log on to it while using SnoopWall NetSHIELD interface.
The remaining optional fields are for information that may be useful to the network
administration group, such as the location of the appliance or locations serviced by the
appliance.
Ten Tara Boulevard, Suite 140
Nashua NH 03062
M
ANAGING

Manage Appliances from the left menu. The Managed
A M
DDING ANAGED

Manage Appliances and click the Add Appliance button.
A
PPLIANCES
A
PPLIANCES
Copyright © 2017 SnoopWall, Inc.
Page | 93