Network Configuration - NetSHIELD Branch PRO User Manual

N C
ETWORK ONFIGURATION
The network configuration information you enter controls how SnoopWall NetSHIELD accesses
the network.
To set up your configuration:


Select System
Configuration screen appears. This application automatically turns off DHCP for the
appliance. If you want the appliance to acquire its IP Address dynamically you must set that
option on the console. SnoopWall strongly recommends a static IP address for the
appliance.

The default gateway is display-only, but may be changed on the console if necessary.

Enter additional or new information if required and click Save to retain the settings.

With the exception of Eth0, it is possible to clear NICs. When another NIC such as Eth1 is
selected, the button on the right is enabled and its text changes to specify the current NIC.
Ten Tara Boulevard, Suite 140
Nashua NH 03062
Network Configuration from the left menu. The Network
Copyright © 2017 SnoopWall, Inc.
Page | 26