Adding Peripheral Information - NetSHIELD Branch PRO User Manual


You can remove a software package from the list by clicking the check box to the left of its
name, then clicking the Remove Selected button.
You can add peripherals on your network independently of an asset and later link the equipment
to particular system assets. This list helps you keep track of monitors, printers, and a variety of
other important equipment that may or may not need to be audited, but nevertheless has value
to the company. Later, you may associate peripherals with particular systems (see Associating
Users, Software, & Peripherals With Systems).
To add information about peripherals on your network:

Select Asset Tracker  Peripherals from the left menu.
The Peripherals list displays. Initially, this list is empty, as shown below.

Click the Add Peripheral button to the
upper left to open the Add Peripheral
Device dialog.

Fill in requested peripheral data.

Fields with an asterisk are required; others
are optional. See Guidelines in the table
below.
Item
Model (Required)
Manufacturer (Required)
Serial Number (Required)
Description

Click the Add Peripheral button at the bottom of the page to save peripheral data. This
returns you to the Peripherals List.
Ten Tara Boulevard, Suite 140
Nashua NH 03062
A P
DDING ERIPHERAL
Guideline
Alphabetic and numeric characters and hyphens allowed.
Alphabetic and numeric characters and hyphens allowed.
Alphabetic and numeric characters and hyphens allowed.
Enter up to 75 characters describing the peripheral. You may
wish to include other relevant information, such as cartridge
model numbers, year purchased, etc.
I
NFORMATION
Copyright © 2017 SnoopWall, Inc.
Page | 59