Scheduling Audits; Scheduling Backups And Audits; Setting Audit Frequency And Start Time - NetSHIELD Branch PRO User Manual

tests run on any given IP address, and runs only those not run before. Incremental audits,
therefore, run more quickly and save time.
Before you take the next step in the Audit Wizard, you need to think about logistics of
scheduling your audits and all related issues in your particular work environment.
The following sections include Scheduling Audits and Setting Audit Frequency and Start Time.
This information should help you decide appropriate settings for your company.
Take several factors into consideration when determining an audit schedule.
Do not overlap your backup schedule with the audit schedule. To avoid overlap, be aware of
how long the audit may take. Refer to Estimating Audit
how long your backup usually takes, schedule it to run first and schedule audits after you expect
the backup to be complete.

Setting Audit Frequency and Start Time

The third page of the Audit Wizard allows you to set audit frequency and timing.
The Frequency of Audit and Start Time fields indicate when and how often this audit runs once it
is started from the Audits: Manage page.

Set Frequency of Audit to one of the settings shown. See setting descriptions in the table
below.
Setting
Now
Daily
Ten Tara Boulevard, Suite 140
Nashua NH 03062
S
CHEDULING
S B
CHEDULING
Description
Runs the audit as soon as it is activated. (Audit automatically returns to
Inactive setting after completion).
Runs the audit at the same time each day. Use the pull down menus in the
A
UDITS
A
ACKUPS AND UDITS
Length. As a precaution, if you know
Copyright © 2017 SnoopWall, Inc.
Page | 73