List Categories; Determining Ping Response Of Nodes On Subnet; Ping Latency Chart - NetSHIELD Branch PRO User Manual


The four radio buttons at the bottom of the box allow you to place the asset into one of four
categories. You can manage your assets more efficiently if you use specific classifications.
List categories are defined below. More information is available in the IP Categories
section that follows.

List Categories

List Category
Untrust
Trust and Audit-exempt
Trust and Firewall/SmartSwitch safe
Trust

Click Add System below the System Information box to enter the asset into the
database.
D P
ETERMINING
You can create a chart showing the ping results for all IP addresses displayed in your audit.

Select Network Access Control
The chart shows IP addresses and the number of milliseconds it took the node to respond
to the ping.
The bars compare the length of time for each node's response.
Systems may not respond because they choose not to, are powered down or disconnected, or
cannot respond in a timely manner.
Ten Tara Boulevard, Suite 140
Nashua NH 03062
R
ING ESPONSE OF
P L
ING ATENCY


Ping Latency Chart

Description
Asset that has not been given permission to be on
the network.
Known, clean asset that does not need to be
scanned regularly.
Known, clean asset that does not need to be
blocked/quarantined at the Firewall or
SmartSwitch.
Known, clean asset considered part of the
company's resources.
N S
ODES ON UBNET
C
HART
Copyright © 2017 SnoopWall, Inc.
Page | 32