Setting System Date/Time; Background Scans - NetSHIELD Branch PRO User Manual


Set the date and time the first time you log in to
SnoopWall NetSHIELD.


Click System
and time on your initial NetSHIELD use.

The Change Date screen appears.

Enter the system date and time information. Click
the Change button to put the new date and time
into effect. Daylight savings time changes occur automatically.

Click Save.
To run a daily analysis of the asset inventory in the background to detect changes in the asset

list click System

Background Scans.

Enable background scans by clicking the button on the lower left. The button toggles
Background Scans .
parameters indicated. When background scanning is disabled, any active scans are
immediately terminated.
At the upper right are the 3 parameters that control background scanning. Maximum Active
Analyses is the number of scans that can be running simultaneously. It has a range of 1-10.
Timeout indicates the amount of time a scan will be allowed to run before it is forced to
terminate. Its range is 1-10 minutes. Purge indicates how long the scan results will be kept in
the database. Scan results may be kept for a maximum of 365 days. To view the scan results,
go into the Asset Manager and use the mouse button menu for specific assets.
On the right is the list of active scans. You can force active scans to terminate by selecting one
or more from the list and clicking the Kill Selected Scans button.
Ten Tara Boulevard, Suite 140
Nashua NH 03062
S S
ETTING
Date and Time to set the date
B
ACKGROUND
Scans of all assets are queued and scanning begins at 10:00AM using the
D /T
YSTEM ATE IME
S
CANS
to Disable
Copyright © 2017 SnoopWall, Inc.
Page | 18