Netshield Blocking; Enabling Manual Netshield Blocking; Enabling Automatic Netshield Blocking - NetSHIELD Branch PRO User Manual


Review the settings.

Click Save to save the settings.
Important Note: Ranges will be based on IP address(es) assigned to the appliance network
interface cards.

NetShield Blocking

NetSHIELD Blocking works by blocking communication routes from Untrusted blocked assets.
Important Note: A full asset discovery should be run prior to enabling NetSHIELD
Blocking. Assets within NetSHIELD Blocking Range will be blocked if they are
Untrusted.
Important Note: Packet Sniffing and NetSHIELD Block Ranges will be based on
IP address(es) assigned to the appliance network interface cards. The appliance
asset list will be used for the protect range. All IP addresses contained in the
asset list, trusted and Untrusted, will be protected from assets blocked with
NetSHIELD blocking.

Enabling Manual NetSHIELD Blocking

Selecting option #1 from the One-Click Configuration options and enabling asset detection. To
block an asset, go to the Asset manager and click the second mouse button over an asset listed
in the grid, and choose Block Now from the pop-up menu.

Enabling Automatic NetSHIELD Blocking

Start by selecting option #2 from the One-Click Configuration options. Open the advanced
settings and examine the following options.

Select the Enable NetSHIELD Blocking checkbox.
Ten Tara Boulevard, Suite 140
Nashua NH 03062
Copyright © 2017 SnoopWall, Inc.
Page | 46