Queuing Trusted Asset Scans - NetSHIELD Branch PRO User Manual

To create a protocol for SnoopWall NetSHIELD to follow upon discovering new assets,
complete the following fields in the Asset Detection System window under NAC

Configuration Asset Detection System.
Enable Audit Upon Detection—SnoopWall NetSHIELD will audit assets upon discovery. Check
the appropriate boxes to enable the audit For All Assets or just Untrusted assets. Enter the
network address range(s) to define the detection level.
Enter distinct IP ranges separated by commas, as shown in the illustration.

Notify by Email—Provide email addresses for individuals who should be notified of
detected assets. They will be notified in addition to the people you designated under
Notifications in Setup.

You may also select the frequency at which you wish to receive Untrusted asset alerts.

Click Save.
Select Queue Trusted Asset Scans When Thread Threshold Exceeded in order to queue
scans of trusted assets. Scans will only be queued if the thread threshold is exceeded.
Ten Tara Boulevard, Suite 140
Nashua NH 03062
Q T
UEUING RUSTED
A S
SSET CANS
Copyright © 2017 SnoopWall, Inc.
Page | 51