Configuring The Syslog Server; Clearing Command Center Alerts - NetSHIELD Branch PRO User Manual

Asset Detection System Stopped
Shutdown
Create Audit
Remove Audit
Stop All Audits
Factory Settings


Select Setup

Enter your syslog server port into the Syslog Port Number field

Enter your syslog server IP into the Syslog Server IP Address field

Click Save.
Clearing Command Center Alerts will remove all alerts for the selected appliance from the
command center log database. The alerts will not be removed from the selected appliance's
database. Command Center Alerts should always be cleared following a factory reset.

Select Command Center

Select a managed appliance from the list.
Ten Tara Boulevard, Suite 140
Nashua NH 03062
IP Address of Client Appliance | Log ID | ADS_stopped |
Date/Time of Operation
IP Address of Client Appliance | Log ID | Shutdown |
Date/Time of Operation
IP Address of Client Appliance | Log ID | Create_Audit | Audit
Name | Date/Time of Operation
IP Address of Client Appliance | Log ID | Remove_Audit |
Audit Name | Date/Time of Operation
IP Address of Client Appliance | Log ID | Stop_All_Audits |
Date/Time of Operation
IP Address of Client Appliance | Log ID | Factory_Settings |
Date/Time of Operation
C
ONFIGURING THE
Syslog Messages from the Remote Appliance Console menu.
C C
LEARING OMMAND

Manage Appliances from the menu.
S S
YSLOG ERVER
C A
ENTER LERTS
Copyright © 2017 SnoopWall, Inc.
Page | 98