MALWARE DETECTION SYSTEM
In the event a network asset attempts to contact a known malware IP address, the administrator
will be notified and the asset will be set as untrusted.
A block can occur depending on NetSHIELD™ Appliance settings. Blocked assets are
indicated with a red background in the Asset Manager.
NOTE: Eth1 must be connected and configured as span or mirror
port or Malware Scanning will not stay on. Also Asset Detection
System must be on.
Note: 1. Agentless Malware Detection works in conjunction with NetSHIELD™
Appliance Asset Detection System's packet sniffing. Assets within the packet sniffing
range will also be scanned for malware when malware detection is enabled.
Assets not within the sniffing range will not be scanned for malware.
2. Agentless Malware Detection works in conjunction with NetSHIELD™
Appliance Asset Detection System's blocking capabilities. Assets within
Ten Tara Boulevard, Suite 140
NetSHIELD™ Block range will be blocked if they attempt to contact a malware IP
Nashua NH 03062
address.
OVERVIEW
CONFIGURATION MALWARE DETECTION
MALWARE DETECTION SYSTEM
Copyright © 2017 SnoopWall, Inc.
Page | 64