Viewing Asset Report List - NetSHIELD Branch PRO User Manual


Click the Edit button at the bottom of the page to reach the Asset Tracker: System
Information page and make the necessary changes. Be sure to click Update System at
the bottom of the page to save your revisions.
To add a new system:

Select Asset Tracker
menu.

Click the Add System button to the upper left of
the Asset List. The Asset Tracker: System
Information page appears.
(You can also get to the Asset Tracker: System
Information page by selecting Network Access

Control Add Assets.)

Fill in the requested data. For more information
about these fields, see Adding IP Addresses
Manually in the Setting Up Network Access
Control section.

Click Add System to save your entry.
Note: Required fields (marked with an asterisk) must contain information. After
you add system data, check the System Information page again. The MAC
Address, Host Name, Operating System, and Manufacturer may be filled in for
you. We strongly recommend you only change the MAC Address and Host Name
fields if it is absolutely necessary.
After you modify the list in any way, you should see changes in the Systems List (Asset
List).
NOTE: When generating report summaries on critical servers (in Executive and
Management reports), SnoopWall NetSHIELD refers to systems with the word
Server in the System Type field. If no systems are of type Server, SnoopWall
NetSHIELD reports instead on most vulnerable systems under the heading Most
Vulnerable Critical Servers.

Viewing Asset Report List

SnoopWall NetSHIELD generates a variety of reports you can use to more effectively manage
your assets.

Select Asset Tracker

Click on the IP Address of interest. The Available Reports list for that IP address appears.

See Overview of Report Types and Content for more information on reports.
Ten Tara Boulevard, Suite 140
Nashua NH 03062

Systems from the left

Systems from the left menu.
Copyright © 2017 SnoopWall, Inc.
Page | 56