Interface Source Configuration - ZyXEL Communications CellPipe 7130 RG User Manual

Table 88 IGMP (continued)
LABEL
Maximum
Multicast Group
Members
Fast Leave
Enable
Apply

21.3 Interface Source Configuration

Use this screen to configure the server where the CellPipe 7130 RG gets the
multicast group information. Click Advanced > IGMP Source Configuration to
open the following screen.
Figure 122 IGMP Source Configuration
The following table describes the fields in this screen.
Table 89 IGMP Source Configuration
LABEL
Active Source
List
#
Active
Address
Modify
CellPipe 7130 RG User's Guide
DESCRIPTION
This is the maximum number of members allowed for a multicast
group.
Enable this to have the host stop sending multicast messages to an IP
address that has left the multicast group or a multicast group with no
members.
Click this button to save your settings back to the CellPipe 7130 RG.
DESCRIPTION
Check this to stop having the CellPipe 7130 RG act as an IGMP proxy.
Deselect this to have the CellPipe 7130 RG act as an IGMP proxy and
then create the IP address(es) of the actual IGMP multicast servers.
This is the index number of the server.
Enable this to use the server as the IGMP source configuration.
This is the IP address of the server that has the multicast group
membership information that the host will use.
Click the Edit icon to change the entry.
Click the Delete icon to delete the entry,
Chapter 21 IGMP
265