Technical Reference - ZyXEL Communications CellPipe 7130 RG User Manual

Table 40 Wireless LAN > Advanced Setup
LABEL
802.11 Mode
802.11
Protection
Preamble
Apply
Reset

7.10 Technical Reference

This section discusses wireless LANs in depth. For more information, see the
appendix.
CellPipe 7130 RG User's Guide
DESCRIPTION
Select 802.11b Only to only allow IEEE 802.11b compliant WLAN
devices to associate with the CellPipe 7130 RG.
Select 802.11g Only to allow IEEE 802.11g compliant WLAN devices to
associate with the CellPipe 7130 RG. IEEE 802.11b compliant WLAN
devices can associate with the CellPipe 7130 RG only when they use the
short premble type.
Select 802.11n Only to only allow IEEE 802.11n compliant WLAN
devices to associate with the CellPipe 7130 RG. This can increase
transmission rates, although IEEE 802.11b or IEEE 802.11g clients will
not be able to connect to the CellPipe 7130 RG.
Select 802.11b/g Mixed to allow either IEEE 802.11b or IEEE 802.11g
compliant WLAN devices to associate with the CellPipe 7130 RG. The
CellPipe 7130 RG adjusts the transmission rate automatically according
to the wireless standard supported by the wireless devices.
Select 802.11 b/g/n mixed mode to allow both IEEE802.11b,
IEEE802.11g and IEEE802.11n compliant WLAN devices to associate with
the CellPipe 7130 RG. The transmission rate of your CellPipe 7130 RG
might be reduced.
Enabling this feature can help prevent collisions in mixed-mode networks
(networks with both IEEE 802.11b and IEEE 802.11g traffic).
Select Auto to have the wireless devices transmit data after a RTS/CTS
handshake. This helps improve IEEE 802.11g performance.
Select Off to disable 802.11 protection. The transmission rate of your
CellPipe 7130 RG might be reduced in a mixed-mode network.
This field displays Off and is not configurable when you set 802.11
Mode to 802.11b Only.
Select a preamble type from the drop-down list menu. Choices are Long
or Short. The default setting is Long. See the appendix for more
information.
This field is not configurable and the CellPipe 7130 RG uses Short when
you set 802.11 Mode to 802.11g Only or 802.11n Only.
Click this to save your changes back to the CellPipe 7130 RG.
Click this to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
159