The following table describes the fields in this screen.
Table 83 Advanced > UPnP
LABEL
Activate Universal Plug
and Play (UPnP) Feature
Apply/Save
19.4 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
Click Start and Control Panel. Double-click Add/Remove Programs.
1
Click on the Windows Setup tab and select Communication in the
2
Components selection box. Click Details.
Figure 102 Add/Remove Programs: Windows Setup: Communication
CellPipe 7130 RG User's Guide
Chapter 19 Universal Plug-and-Play (UPnP)
DESCRIPTION
Select this check box to enable UPnP. Be aware that anyone
could use a UPnP application to open the web configurator's
login screen without entering the CellPipe 7130 RG's IP
address (although you must still enter the password to access
the web configurator).
Click this to save the setting to the CellPipe 7130 RG.
247