Table of Contents
Advertisement
Chapter 5 WAN Setup
Table 26 Network > WAN > Services > Add/Edit - DNS Server: PPPoE, PPPoA,
IPoE or IPoA
LABEL
Secondary
DNS server
Back
Next
5.6.1.7 Configuration Summary
This read-only screen shows the current WAN connection settings.
Figure 32 Network > WAN > Services > Add/Edit - Configuration Summary
The following table describes the labels in this screen.
Table 27 Network > WAN > Services > Add/Edit - Configuration Summary
LABEL
Port / VPI / VCI
Connection Type
Service Name
Service Category
IP Address
Service State
122
DESCRIPTION
Enter the second DNS server address assigned by the ISP.
Click this button to return to the previous screen.
Click this button to continue.
DESCRIPTION
This is the DSL port number, VPI and VCI for an ATM connection.
This displays N/A for an Ethernet WAN conenction or not available for
a PTM connection.
This is the encapsulation method used by this connection.
This is the name of the service.
This is the ATM traffic class.
This field is blank for a PTM or Ethernet WAN conenction.
This shows whether the WAN IP address is assigned by the ISP,
manually configured or not configurable.
This shows whether this service is active or not.
CellPipe 7130 RG User's Guide
Advertisement
Table of Contents
Troubleshooting
