C
H A P T E R
13.1 Overview
The CellPipe 7130 RG usually uses the default gateway to route outbound traffic
from computers on the LAN to the Internet. To have the CellPipe 7130 RG send
data to devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the CellPipe
7130 RG's LAN interface. The CellPipe 7130 RG routes most traffic from A to the
Internet through the CellPipe 7130 RG's default gateway (R1). You create one
static route to connect to services offered by your ISP behind router R2. You
create another static route to communicate with a separate network behind a
router R3 connected to the LAN.
Figure 81 Example of Static Routing Topology
A
R3
13.1.1 What You Can Do in this Chapter
The Static Route screens let you view and configure IP static routes on the
CellPipe 7130 RG
CellPipe 7130 RG User's Guide
LAN
WAN
(Section 13.2 on page
210).
13
Static Route
R1
R2
209