About This User's Guide About This User's Guide Intended Audience This manual is intended for people who want to configure the CellPipe 7130 RG using the web configurator. Related Documentation Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains information on setting up your network and configuring for Internet access.
Syntax Conventions • The CellPipe 7130 RG may be referred to as the “CellPipe 7130 RG”, the “device”, the “system” or the “product” in this User’s Guide. • Product labels, screen names, field labels and field choices are all in bold font.
Page 5
Figures in this User’s Guide may use the following generic icons. The CellPipe 7130 RG icon is not an exact representation of your device. CellPipe 7130 RG Computer Notebook computer Server DSLAM Firewall Telephone Switch Router CellPipe 7130 RG User’s Guide...
Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and electronic equipment should be treated separately. CellPipe 7130 RG User’s Guide...
Introducing the CellPipe 7130 RG ..................19 1.1 Overview ..........................19 1.2 Ways to Manage the CellPipe 7130 RG ................19 1.3 Good Habits for Managing the CellPipe 7130 RG ............... 20 1.4 Applications for the CellPipe 7130 RG ................20 1.4.1 Internet Access ......................20 1.4.2 HomePNA ........................
Page 10
2.9 Configuring Static Route for Routing to Another Network ........... 74 2.10 Configuring QoS Queue and Class Setup ................. 77 2.11 Access the CellPipe 7130 RG Using DDNS ..............80 2.11.1 Registering a DDNS Account on www.dyndns.org ........... 81 2.11.2 Configuring DDNS on Your CellPipe 7130 RG ............81 2.11.3 Testing the DDNS Setting ..................
Page 11
7.7 The WPS Station Screen ....................155 7.8 The WDS Screen ......................156 7.9 The Advanced Setup Screen .................... 158 7.10 Technical Reference ......................159 7.10.1 Wireless Network Overview ................... 160 7.10.2 Additional Wireless Terms ..................161 CellPipe 7130 RG User’s Guide...
Page 12
11.2 What You Need to Know ....................191 11.3 The Firewall Screen ......................193 11.3.1 Creating Incoming Firewall Rules ................. 194 11.4 The DoS Screen ......................195 Chapter 12 Certificate ..........................197 12.1 Overview .......................... 197 CellPipe 7130 RG User’s Guide...
Page 13
16.3 The Quality of Service General Screen ................221 16.4 The Queue Setup Screen ....................222 16.4.1 Adding a QoS Queue .................... 224 16.5 The Class Setup Screen ....................225 16.5.1 QoS Class Edit ...................... 227 16.6 The Policer Setup Screen .................... 231 CellPipe 7130 RG User’s Guide...
Page 14
20.2.1 Adding a Schedule ....................258 20.3 The Content Filter Screen ....................259 20.3.1 Adding Filter Rule ....................260 Chapter 21 IGMP............................261 21.1 Overview .......................... 261 21.1.1 What You Can Do in this Chapter ................261 CellPipe 7130 RG User’s Guide...
Page 15
25.5 The OAM Ping Test Screen ..................... 287 Chapter 26 Troubleshooting........................289 26.1 Power, Hardware Connections, and LEDs ..............289 26.2 CellPipe 7130 RG Access and Login ................290 26.3 Internet Access ........................ 292 26.4 USB Device Connection ....................295 26.5 Wireless LAN Troubleshooting ..................295...
Page 16
Appendix C Pop-up Windows, JavaScripts and Java Permissions ........351 Appendix D IP Addresses and Subnetting ................361 Appendix E Wireless LANs ....................373 Appendix F Common Services..................... 389 Appendix G Legal Information....................393 Index............................397 CellPipe 7130 RG User’s Guide...
Refer to the label on the bottom of your CellPipe 7130 RG. The CellPipe 7130 RG has a a USB port used to share files via a USB memory stick or a USB hard drive. The CellPipe 7130 RG can also function as a media server to let other users in the network open media files stored in the USB device.
Chapter 1 Introducing the CellPipe 7130 RG 1.3 Good Habits for Managing the CellPipe 7130 Do the following things regularly to make the CellPipe 7130 RG more secure and to manage the CellPipe 7130 RG more effectively. • Change the password. Use a password that’s not easy to guess and that consists of different types of characters, such as numbers and letters.
Page 21
PPPoE Ethernet You can also configure IP filtering on the CellPipe 7130 RG for secure Internet access. When the IP filter is on, all incoming traffic from the Internet to your network is blocked by default unless it is initiated from your network. This means that probes from the outside to your network are not allowed, but you can safely browse the Internet and download files.
DSL Internet access and a coaxial outlet to relay Internet connectivity to other coxial outlets in the building. The laptop (B) connects wirelessly to the CellPipe 7130 RG. The set-up box (C) connects into a coaxial outlet in another part of the house for access to online videos.
Page 23
Use the built-in USB 2.0 port to share files via a USB memory stick or a USB hard drive (B). You can connect one USB hard drive to the CellPipe 7130 RG at a time. Figure 3 USB File Sharing Application Media Server You can also use the CellPipe 7130 RG as a media server.
Chapter 1 Introducing the CellPipe 7130 RG 1.5 Hardware Connections Remove the CellPipe 7130 RG’s plastic cover before using it. Figure 5 Hardware Connections Do one of the following for your Internet connection: DSL: Use a telephone wire to connect this port to a telephone jack (or the DSL or MODEM jack on a splitter, if you have one).
Page 25
USB 2.0: Connect a USB (version 2.0 or lower) memory stick or a USB hard drive for file sharing. The CellPipe 7130 RG automatically detects the USB device. Use a USB extension cable if the stick is too big to fit.
1.6 LEDs (Lights) The following graphic displays the labels of the LEDs. Figure 6 LEDs on the Device None of the LEDs are on if the CellPipe 7130 RG is not receiving power. Table 1 LED Descriptions COLO STATUS DESCRIPTION...
Page 27
The CellPipe 7130 RG recognizes a USB connection. Blinking The CellPipe 7130 RG is sending/receiving data to /from the USB device connected to it. The CellPipe 7130 RG does not detect a USB connection. GigE Green The Giga Ethernet connection is working.
Press the WPS button for more than one second and release it. Press the WPS button on another WPS -enabled device within range of the CellPipe 7130 RG. The WPS LED should flash while the CellPipe 7130 RG sets up a WPS connection with the wireless device. Refer to Section 7.6 on page 153...
Access the CellPipe 7130 RG Using DDNS on page 80 Note: The tutorials featured in this chapter require a basic understanding of connecting to and using the Web Configurator on your CellPipe 7130 RG. For details, see the included Quick Start Guide. For field descriptions of individual screens, see the related technical reference in this User's Guide.
An access point or wireless router is referred to as “AP” and a computer with a wireless network card or USB/PCI adapter is referred to as “wireless client” here. We use the CellPipe 7130 RG web screens and M-302 utility screens as an example. The screens may vary slightly for different models.
Page 31
Set security mode to WPA-PSK and enter “ThisismyWPA-PSKpre-sharedkey” in the Pre-Shared Key field. Click Apply. Click the Advanced Setup tab and make sure 802.11b/g/n Mixed is selected in the 802.11 Mode field. Click Apply. Wireless LAN > Advanced Setup CellPipe 7130 RG User’s Guide...
Click the WLAN Station List hyperlink in the AP’s Status screen. You can see if any wireless client has connected to the AP. Figure 7 Status: WLAN Station List 2.2.3 Configuring the Wireless Client This section describes how to connect the wireless client to a network. CellPipe 7130 RG User’s Guide...
After you install the wireless utility and then insert the wireless client, follow the steps below to connect to a network using the Site Survey screen. Open the wireless utility and click the Site Survey tab to open the screen shown next. Utility: Site Survey CellPipe 7130 RG User’s Guide...
Page 34
Exit button to return to the Site Survey screen. Utility: Security Settings The Confirm Save window appears. Check your settings and click Save to continue. Utility: Confirm Save CellPipe 7130 RG User’s Guide...
This example illustrates how to set up a profile and connect the wireless client to an access point configured for WPA-PSK security. In this example, the SSID is “SSID_Example3”, the profile name is “PN_Example3” and the pre-shared key is “ThisismyWPA-PSKpre-sharedkey”. You have chosen the profile name “PN_Example3”. CellPipe 7130 RG User’s Guide...
Page 36
Utility: Add New Profile Give the profile a descriptive name (of up to 32 printable ASCII characters). Select Infrastructure and either manually enter or select the AP's SSID in the Scan Info table and click Select. CellPipe 7130 RG User’s Guide...
Page 37
This screen varies depending on the encryption method you selected in the previous screen. Enter the pre-shared key and leave the encryption type at the default setting. Utility: Profile Encryption In the next screen, leave both boxes checked. Profile: Wireless Protocol Settings. CellPipe 7130 RG User’s Guide...
Page 38
11 If you cannot access the Internet go back to the Profile screen, select the profile you are using and click Edit. Check the details you entered previously. Also, refer to the Troubleshooting section of this User's Guide or contact your network administrator if necessary. CellPipe 7130 RG User’s Guide...
The figure below shows the hardware setup for this tutorial: Connect your CellPipe 7130 RG to the Internet source. This could be either DSL or Ethernet. Connect the CellPipe 7130 RG’s coaxial port a coaxial outlet in your house. This relays Internet connectivity to other coaxial outlets in other parts of the house.
IPTV subscription. 2.4 How to Use ATM QoS with Multiple PVCs The CellPipe 7130 RG allows you to have more than one PVC using the ATM layer- 2 interface. You can apply different ATM QoS settings to traffic through different PVCs.
Chapter 2 Tutorials 2.4.1 Configuring PVCs Follows the steps below to set up two PVCs on the CellPipe 7130 RG. Table 3 Multiple PVC Settings INTERFACE NAME WAN SERVICE 0/33 ppp0 PPPoE (pppoe_0_0_33) 0/34 atm1 IPoE (ipoe_0_0_34) Click Network > WAN > Connect.
Page 42
Select Non Realtime VBR in the Service Category field. Set the Peak Cell Rate as 1415 (divide the bandwidth 600000 bps by 424) and set both the Sustainable Cell Rate and Maximum Burst Size as 1414 (which is less than the peak cell rate). CellPipe 7130 RG User’s Guide...
Page 43
Click Apply to save the changes and go back to the Connect screen. 2.4.1.1 Internet Connection Settings for PVC 1 Click Network > WAN > Servicesto configure WAN connection settings for PVC 1. Click Add. CellPipe 7130 RG User’s Guide...
Page 44
Chapter 2 Tutorials Select PVC 1 (atm0/0_0_33) as the layer-2 interface. Click Next. Select PPP over Ethernet and click Next. CellPipe 7130 RG User’s Guide...
Page 45
Remove the existing interfaces in the Selected Default Gateway Interfaces list. Select and move a WAN interface (ppp0 in this example) to the Selected Default Gateway Interfaces list to use that interface as the default gateway. Click Next. CellPipe 7130 RG User’s Guide...
Page 46
Select the first option. Remove the existing interfaces in the Selected DNS Server Interfaces list. Select and move a WAN interface (ppp0 in this example) to the Selected DNS Server Interfaces list to use that interface as the system DNS server. Click Next. CellPipe 7130 RG User’s Guide...
Page 47
Services screen. 2.4.1.2 Internet Connection Settings for PVC 2 Click Add in the WAN > Services screen to configure WAN connection settings for PVC 2. Select PVC 2 (atm2/0_0_34) as the layer-2 interface. Click Next. CellPipe 7130 RG User’s Guide...
Page 48
Chapter 2 Tutorials Select IP over Ethernet and click Next. Select Obtain an IP address automatically and click Next. CellPipe 7130 RG User’s Guide...
Page 49
Remove the existing interfaces in the Selected Default Gateway Interfaces list. Select and move a WAN interface (atm1 in this example) to the Selected Default Gateway Interfaces list to use that interface as the default gateway. Click Next. CellPipe 7130 RG User’s Guide...
Page 50
Selected DNS Server Interfaces list to use that interface as the system DNS server. Click Next. The summary screen displays. Click Apply/Save to save your changes and go back to the Services screen. CellPipe 7130 RG User’s Guide...
WAN INTERFACE 192.168.1.33 80 (HTTP) AA:BB:AA:BB:AA:BB ppp0 (0/33) 192.168.1.34 21 (FTP) FF:CC:FF:CC:FF:CC atm2 (0/34) 25 (E-mail) Click Advanced > Policy Forwarding to open the following screen. Click Add to create a new policy forwarding group GR1. CellPipe 7130 RG User’s Guide...
Page 52
WAN Interface list. Enter 192.168.1.34 as the Source IP Address. Again, select the protocol and enter the source port, as well as the source MAC address. Click Apply to finish the settings and go back to the Policy Forwarding screen. CellPipe 7130 RG User’s Guide...
This tutorial shows you how to set up a dedicated WAN connection for ISP management of the CellPipe 7130 RG and prevent the clients on the LAN from configuring the CellPipe 7130 RG. You set up two DSL connections with different VLAN IDs and priorities to separate clients traffic from management traffic.
Make sure you set the WAN Link Mode to DSL in the Network > WAN > Mode screen. By default, there is a PTM layer-2 interface in VLAN MUX mode configured already on the CellPipe 7130 RG. DSL Connection for Internet Access Go to the WAN > Services screen. Click Add.
Page 55
Select ptm0/(0_0_1) as the layer-2 interface. Click Next. Select PPP over Ethernet, enter a descriptive service name (Internet in this example), and set the priority level to 2 and VLAN ID to 200. Click Next. CellPipe 7130 RG User’s Guide...
Page 56
Chapter 2 Tutorials Enter the user name (user@isp.net for example), password (qwert12345 for example) and service name (isp.net for example) for the PPP connection. Click Next. CellPipe 7130 RG User’s Guide...
Page 57
Select the first option. Remove the existing interfaces in the Selected DNS Server Interfaces list. Select and move a WAN interface (ppp1.200 in this example) to the Selected DNS Server Interfaces list to use that interface as the system DNS server. Click Next. CellPipe 7130 RG User’s Guide...
Page 58
The summary screen displays. The VLAN ID is appended to the service name you specified automatically. Click Apply/Save to save your changes and go back to the Internet Connection screen. DSL Connection for Remote Management Go to the WAN > Services screen. Click Add. CellPipe 7130 RG User’s Guide...
Page 59
Select ptm0/(0_0_1) as the layer-2 interface. Click Next. Select IP over Ethernet, enter a descriptive service name (RemoteMgmt in this example), and set the priority level to 7 and VLAN ID to 300. Click Next. CellPipe 7130 RG User’s Guide...
Page 60
Chapter 2 Tutorials Select Obtain an IP address automatically and click Next. Make sure Enable NAT is not selected and click Next. CellPipe 7130 RG User’s Guide...
Page 61
Click Next. Select the first option. Keep the WAN interface (ptm0.300 in this example) in the Available WAN Interfaces list to not have the clients use this interface as the system DNS server. Click Next. CellPipe 7130 RG User’s Guide...
Page 62
The summary screen displays. Click Apply/Save to save your changes and go back to the Services screen. The VLAN ID is appended to the service name you specified automatically. The Internet Connection screen should look like the following. CellPipe 7130 RG User’s Guide...
Page 63
ISP for the WAN connections in PTM mode you configured (1 and 2 in this example). Your DSL interface status should also be Up and display the transmission rates. Click the WAN Service Statistics link under More Status in the Status screen. CellPipe 7130 RG User’s Guide...
WAN connections you just configured. 2.5.2 Configuring Remote Management Follow the steps below to not allow access to the CellPipe 7130 RG from the LAN. Click Advanced > Remote MGNT > Service Control. Select the Enable option, and deselect all service options in the LAN column.
USB port of your CellPipe 7130 RG. 2.6.1 Configuring the CellPipe 7130 RG Note: The Media Server feature is enabled by default. To use your CellPipe 7130 RG as a media server, click USB Services > Media Server. Tutorial: USB Services > Media Server...
2.6.2 Using Windows Media Player This section shows you how to play the media files on the USB storage device connected to your CellPipe 7130 RG using Windows Media Player. Tutorial: Media Server Setup (Using Windows Media Player) USB Storage Device...
Page 67
CellPipe 7130 RG. Tutorial: Media Sharing using Windows Vista (3) The CellPipe 7130 RG displays as a playlist. Clicking on the category icons in the right panel shows you the media files in the USB storage device attached to your CellPipe 7130 RG.
Page 68
Open Windows Media Player. It should automatically detect the CellPipe 7130 RG. Tutorial: Media Sharing using Windows 7 (1) If you cannot see the CellPipe 7130 RG in the left panel as shown above, right- click Other Libraries > Refresh Other Libraries.
Tutorial: Media Sharing using Windows 7 (2) 2.6.3 Using a Digital Media Adapter This section shows you how you can use the CellPipe 7130 RG with a DMA to play media files stored in the USB storge device in your TV screen.
Page 70
Turn on the TV and wait for the DMA’s Home (or similar) screen to appear. Using the remote control, go to MyMedia (or similar) to open the following screen. Select the CellPipe 7130 RG as your media server. Tutorial: Media Sharing using DMA-2500 The screen shows you the list of available media files in the USB storage device.
• Access the shared files from a computer 2.7.1 Set Up File Sharing To set up file sharing, you need to enable file sharing on your CellPipe 7130 RG. This shares the files in your USB device to other users in the local network.
Type the user name and password and click OK. File Sharing via Windows Explorer Once you log in to the shared folder via your CellPipe 7130 RG, you do not have to re-log in unless you restart your computer.
Page 73
Enter 666 as the Start and End port. Protocol Select TCP/UDP. This should be the protocol supported by the Doom server. Start/Stop Time Enter 13:00 ~ 20:00 in the time fields and select Friday ~ Saturday in the day field. Select Days CellPipe 7130 RG User’s Guide...
In order to extend your Intranet and control traffic flowing directions, you may connect a router to the CellPipe 7130 RG’s LAN. The router may be used to separate two department networks. This tutorial shows how to configure a static routing rule for two network routings.
Page 75
In this case, B will never receive the traffic. You need to specify a static routing rule on the CellPipe 7130 RG to specify R as the router in charge of forwarding traffic to N2. In this case, the CellPipe 7130 RG routes traffic from A to R and then R routes the traffic to B.This tutorial uses the...
Page 76
Click Apply. The Advanced > Static Route screen should display the route you just added. Now B should be able to receive traffic from A. You may need to additionally configure B’s firewall settings to allow specific traffic to pass through. CellPipe 7130 RG User’s Guide...
(AA:FF:AA:FF:AA:FF for example) of your computer and map it to queue 7. Note: QoS is applied to traffic flowing out of the CellPipe 7130 RG. Traffic that does not match this class is assigned a priority queue based on the internal QoS mapping table on the CellPipe 7130 RG.
Page 78
Active and enter or select the following values: • Name: E-mail • Priority: 4 (High) • Weight: 8 • Rate Limit: 5,000 (kbps) Tutorial: Advanced > QoS > Queue Setup CellPipe 7130 RG User’s Guide...
Page 79
Link this to an item in the Advanced > QoS > Queue Setup screen, which is the E-mail queue created in this example. From Interface This is the interface from which the traffic will be coming from. Select LAN1. CellPipe 7130 RG User’s Guide...
Tutorial: Advanced > QoS > Monitor 2.11 Access the CellPipe 7130 RG Using DDNS If you connect your CellPipe 7130 RG to the Internet and it uses a dynamic WAN IP address, it is inconvenient for you to manage the device from the Internet. The CellPipe 7130 RG’s WAN IP address changes dynamically.
• Hostname: yourrouter.dyndns.org • Service Type: Host with IP address • IP Address: Enter the WAN IP address that your CellPipe 7130 RG is currently using. You can find the IP address on the CellPipe 7130 RG’s Web Configurator Home page.
• Enter the user name (UserName1) and password (12345). Click Apply. 2.11.3 Testing the DDNS Setting Now you should be able to access the CellPipe 7130 RG from the Internet. To test this: Open a web browser on the computer (using the IP address a.b.c.d) that is connected to the Internet.
Internet Explorer. 3.2 User Levels There are three (3) user levels for logging into the CellPipe 7130 RG. The accounts have different access rights as follows : • Subscriber - the default user name is admin and the password is telus. You can change the user name and password for this account.
Note: The CellPipe 7130 RG supports multiple remote management sessions running at one time. 3.2.1 Accessing the Web Configurator Make sure your CellPipe 7130 RG hardware is properly connected (refer to the Quick Start Guide). Launch your web browser. Type "http://192.168.1.1" as the URL.
3.3 Web Configurator Main Screen Figure 9 Home As illustrated above, the main screen is divided into these parts: • A - title bar • B - navigation panel • C - main window • D - status bar CellPipe 7130 RG User’s Guide...
Use this screen to allow SIP sessions to pass through the CellPipe 7130 RG. USB Services File Sharing Share Use this screen to enable file sharing via the CellPipe 7130 RG. Configuration to enable the media server on the CellPipe Media Server Media Server Use this screen 7130 RG.
Page 87
This screen allows you to use a static hostname alias for a dynamic IP address. Remote TR069 Use this screen to configure the CellPipe 7130 RG to be managed MGMT by an ACS (Auto Configuration Server). TR064 Use this screen to enable management via TR-064 on the LAN.
Use this screen to configure your device’s name, domain name, management inactivity timeout and password. Time Setting Use this screen to change your CellPipe 7130 RG’s time and date. Logs View Log Use this screen to view the logs for the level that you selected.
Use the Status screens to look at the current status of the device, system resources and interfaces (LAN, WAN and WLAN). The Status screen also provides detailed information from DHCP and statistics from traffic. 4.2 Status Screen Click Home to open this screen. Figure 10 Status Screen CellPipe 7130 RG User’s Guide...
Page 92
Chapter 4 Status Screens Each field is described in the following table. Table 8 Status Screen LABEL DESCRIPTION Refresh Interval Enter how often you want the CellPipe 7130 RG to update this screen. Apply Click this to update this screen immediately. Device Information User Name This field displays the CellPipe 7130 RG system name.
Page 93
This field displays how long the CellPipe 7130 RG has been running Uptime since it last started up. The CellPipe 7130 RG starts up when you plug it in, when you restart it (Maintenance > Tools > Restart), or when you reset it (see Section 1.7 on page...
Statistics connection(s). See Section 4.2.1 on page Route Info Click this link to view the internal routing table on the CellPipe 7130 RG. Section 4.2.2 on page WLAN Click this link to display the MAC address(es) of the wireless stations Station List that are currently associating with the CellPipe 7130 RG.
Page 95
Enter the time interval for refreshing statistics in this field. Interval Set Interval Click this button to apply the new poll interval you entered in the Refresh Interval field. Stop Click Stop to stop refreshing statistics. CellPipe 7130 RG User’s Guide...
Routing is based on the destination address only and the CellPipe 7130 RG takes the shortest path to forward a packet. Click Status > Route Info to access this screen. Use this screen to view the internal routing table on the CellPipe 7130 RG. Figure 12 Status > Route Info The following table describes the labels in this screen.
4.2.3 WLAN Station List Click Status > WLAN Station List to access this screen. Use this screen to view the wireless stations that are currently associated to the CellPipe 7130 RG. Figure 13 Status > WLAN Station List The following table describes the labels in this screen.
Enter the time interval for refreshing statistics in this field. Interval Set Interval Click this button to apply the new poll interval you entered in the Refresh Interval field. Stop Click Stop to stop refreshing statistics. CellPipe 7130 RG User’s Guide...
TCP/IP configuration at start-up from a server. You can configure the CellPipe 7130 RG as a DHCP server or disable it. When configured as a server, the CellPipe 7130 RG provides the TCP/IP configuration for the clients. If DHCP service is disabled, you must have another DHCP server on your LAN, or else the computer must be manually configured.
Area Network), and other networks, so that a computer in one location can communicate with computers in other locations. The figure below shows the WAN modes supported by the CellPipe 7130 RG (A): Ethernet Mode and DSL mode. Note that in Ethernet mode, B is the Internet Access Device (IAD).
• The Connect screen lets you view, remove or add a layer-2 WAN interface (Section 5.5 on page 105). • The Services screen lets you view and configure the WAN settings on the CellPipe 7130 RG for Internet access (Section 5.6 on page 110). Table 14 WAN Setup Overview...
WAN IP Address The WAN IP address is an IP address for the CellPipe 7130 RG, which makes it accessible from an outside network. It is used by the CellPipe 7130 RG to communicate with other devices in other networks. It can be static (fixed) or dynamically assigned by the ISP each time the CellPipe 7130 RG tries to access the Internet.
Get this information from your ISP. 5.4 The Mode Screen The CellPipe 7130 RG can work in DSL or Ethernet mode depending on your Internet account subscription. Note that you can only enable one mode at a time. Figure 17 Network > WAN > Mode...
Click this button to save your changes. 5.5 The Connect Screen The CellPipe 7130 RG must have a layer-2 interface to allow users to use the DSL port or Ethernet WAN port to access the Internet. The Connect screen lets you choose the layer-2 interface that the CellPipe 7130 RG uses.
Page 106
Chapter 5 WAN Setup Note: The ATM, PTM and Ethernet layer-2 interfaces cannot work at the same time. Figure 18 Network > WAN > Connect: PTM or Ethernet Figure 19 Network > WAN > Connect: ATM CellPipe 7130 RG User’s Guide...
Click the Add button in the Connect screen to open the following. Use this screen to create a new Connect (or layer-2) interface. At the time of writing, you can configure only one PTM or Ethernet Connect interface on the CellPipe 7130 RG. CellPipe 7130 RG User’s Guide...
Page 108
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define Configuration a virtual circuit. This section is available only when you configure an ATM Connect interface. The valid range for the VPI is 0 to 255. Enter the VPI assigned to you. CellPipe 7130 RG User’s Guide...
Page 109
VC/MUX: In VC multiplexing, each protocol is carried on a single ATM virtual circuit (VC). To transport multiple protocols, the CellPipe 7130 RG needs separate VCs. There is a binding between a VC and the type of the network protocol carried on the VC. This reduces payload overhead since there is no need to carry protocol information in each Protocol Data Unit (PDU) payload.
Network > WAN > Internet Connection. The summary table shows you the configured WAN services (connections) on the CellPipe 7130 RG. To use NAT, firewall or IGMP proxy in the CellPipe 7130 RG, you need to configure a WAN connection with PPPoE or IPoE.
Page 111
ATM layer-2 interface) indicates the DSL port. The ppp0_x name (where x starts from 1 and is the index number of PPP connection on the CellPipe 7130 RG) indicates a PPP connection via any one of the WAN interface.
Click the Edit or Add button in the WAN Service screen to configure a WAN connection. 5.6.1.1 WAN Interface This screen displays when you add a new WAN connection. Figure 23 Network > WAN > Services: Add/Edit CellPipe 7130 RG User’s Guide...
WAN connection using the ATM interface, you only need to configure the Enter Service Description field in this screen. Figure 24 Network > WAN > Services > Add/Edit: Service Type Figure 25 Network > WAN > Services > Add/Edit: Service Type - PPPoA or IPoA CellPipe 7130 RG User’s Guide...
Page 114
Click this button to return to the previous screen. Next Click this button to continue. 5.6.1.3 WAN IP Address and DNS Server The screen differs by the encapsulation you selected in the previous screen. See Section 5.7 on page 123 for more information. CellPipe 7130 RG User’s Guide...
Page 115
PPP Password Enter the password associated with the user name above. PPPoE Service Type the name of your PPPoE service here. Name This field is not available for a PPPoA connection. CellPipe 7130 RG User’s Guide...
Page 116
ISP. This field is not available for a PPPoA connection. Enable IGMP Select this check box to have the CellPipe 7130 RG act as an IGMP Multicast Proxy proxy on this connection. This allows the CellPipe 7130 RG to get subscribing information and maintain a joined member list for each multicast group.
Enable DHCP Select this to identify the vendor and functionality of the CellPipe 7130 Option 60 RG in DHCP requests that the CellPipe 7130 RG sends to a DHCP server when getting a WAN IP address. Vendor Class Enter the Vendor Class Identifier (Option 60), such as the type of the Identifier hardware or firmware.
Page 118
Enable DHCP Select this to add vendor specific information to DHCP requests that Option 125 the CellPipe 7130 RG sends to a DHCP server when getting a WAN IP address. Manufacturer Specify the vendor’s OUI (Organization Unique Identifier). It is usually the first three bytes of the MAC address.
Page 119
Select this check box to activate Firewall on this connection. Enable IGMP Select this check box to have the CellPipe 7130 RG act as an IGMP Multicast Proxy proxy on this connection. This allows the CellPipe 7130 RG to get subscribing information and maintain a joined member list for each multicast group.
The interface on the top of the list gets the highest priority. Back Click this button to return to the previous screen. Next Click this button to continue. 5.6.1.6 DNS Server The screen is not available when you select Bridging in the WAN Service Configuration screen. CellPipe 7130 RG User’s Guide...
Page 121
Chapter 5 WAN Setup Note: If you configure only one PVC with IPoA or static IPoE connection using the ATM interface on the CellPipe 7130 RG, you must enter the static DNS server address. Figure 31 Network > WAN > Services > Add/Edit - DNS Server: PPPoE, PPPoA, IPoE or IPoA The following table describes the labels in this screen.
This field is blank for a PTM or Ethernet WAN conenction. IP Address This shows whether the WAN IP address is assigned by the ISP, manually configured or not configurable. Service State This shows whether this service is active or not. CellPipe 7130 RG User’s Guide...
Encapsulation Be sure to use the encapsulation method required by your ISP. The CellPipe 7130 RG can work in bridge mode or routing mode. When the CellPipe 7130 RG is in routing mode, it supports the following methods. IP over Ethernet IP over Ethernet (IPoE) is an alternative to PPPoE.
Page 124
By implementing PPPoE directly on the CellPipe 7130 RG (rather than individual computers), the computers on the LAN do not need PPPoE software installed, since the CellPipe 7130 RG does that part of the task. Furthermore, with NAT, all of the LANs’ computers will have access.
Page 125
The following figure illustrates the relationship between PCR, SCR and MBS. Figure 33 Example of Traffic Shaping ATM Traffic Classes These are the basic ATM traffic classes defined by the ATM Forum Traffic Management 4.0 Specification. CellPipe 7130 RG User’s Guide...
Page 126
Full Cone NAT In full cone NAT, the NAT router maps all outgoing packets from an internal IP address and port to a single IP address and port on the external network. The NAT CellPipe 7130 RG User’s Guide...
Page 127
1 and port A to IP address 2 and port B on the external network for packets sent to IP address 3 and port C. The CellPipe 7130 RG uses a different mapping (IP address 2 and port M) for packets sent to IP address 4 and port...
Page 128
GVRP. The VLAN ID associates a frame with a specific VLAN and provides the information that switches need to process the frame across the network. A tagged frame is four bytes longer than an untagged frame and CellPipe 7130 RG User’s Guide...
Page 129
IGMP. The address 224.0.0.2 is assigned to the multicast routers group. At start up, the CellPipe 7130 RG queries all directly connected networks to gather group membership. After that, the CellPipe 7130 RG periodically updates this information.
Page 130
DNS server fields. If your ISP dynamically assigns the DNS server IP addresses (along with the CellPipe 7130 RG’s WAN IP address), set the DNS server fields to get the DNS server address from the ISP.
6.1.1 What You Can Do in this Chapter The LAN IP screen lets you set the LAN IP address and subnet mask of your CellPipe 7130 RG and configure other LAN TCP/IP settings (Section 6.3 on page 133). CellPipe 7130 RG User’s Guide...
DHCP DHCP (Dynamic Host Configuration Protocol) allows clients to obtain TCP/IP configuration at start-up from a server. This CellPipe 7130 RG has a built-in DHCP server capability that assigns IP addresses and DNS servers to systems that support DHCP client capability.
DESCRIPTION LAN TCP/IP IP Address Enter the LAN IP address you want to assign to your CellPipe 7130 RG in dotted decimal notation, for example, 192.168.1.1 (factory default). IP Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0 (factory default).
DNS Servers Assigned by DHCP Server If you do not configure DNS servers, the CellPipe 7130 RG uses its LAN IP address and tells the DHCP clients on the LAN that itself is the DNS server. When a LAN client sends a DNS query to the CellPipe 7130 RG, the CellPipe 7130 RG forwards the query to its system DNS server you configured in the WAN screen.
Page 135
TCP/IP configuration at start-up from a server. You can configure the CellPipe 7130 RG as a DHCP server or disable it. When configured as a server, the CellPipe 7130 RG provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or else the computer must be manually configured.
Page 136
The subnet mask specifies the network number portion of an IP address. Your CellPipe 7130 RG will compute the subnet mask automatically based on the IP address that you entered. You don't need to change the subnet mask computed by the CellPipe 7130 RG unless you are instructed to do otherwise.
Page 137
IP Alias IP alias allows you to partition a physical network into different logical networks over the same Ethernet interface. The CellPipe 7130 RG supports three logical LAN interfaces via its single physical Ethernet interface with the CellPipe 7130 RG itself as the gateway for each LAN network.
7.1.1 What You Can Do in this Chapter This chapter describes the CellPipe 7130 RG’s Network > Wireless LAN screens. Use these screens to set up your CellPipe 7130 RG’s wireless connection. • The General screen lets you turn the wireless connection on or off, set up wireless security and make other basic configuration changes (Section 7.4 on...
Chapter 7 Wireless LAN • The WDS screen lets you set up a Wireless Distribution System, in which the CellPipe 7130 RG acts as a bridge with other access points (Section 7.8 on page 156). • The Advanced Setup screen lets you change the wireless mode, and make other advanced wireless configuration changes (Section 7.9 on page...
Page 141
Because of the damage that can be done by a malicious attacker, it’s not just people who have sensitive information on their network who should use security. Everybody who uses any wireless network should ensure that effective security is in place. CellPipe 7130 RG User’s Guide...
• What advanced options do you want to configure, if any? If you want to configure advanced options, ensure that you know precisely what you want to do. If you do not want to configure advanced options, leave them alone. CellPipe 7130 RG User’s Guide...
Chapter 7 Wireless LAN 7.4 The General Screen Note: If you are configuring the CellPipe 7130 RG from a computer connected to the wireless LAN and you change the CellPipe 7130 RG’s SSID or security settings, you will lose your wireless connection when you press Apply to confirm.
Page 144
Select this check box to hide the SSID in the outgoing beacon frame so a Name (SSID) station cannot obtain the SSID through scanning using a site survey tool. Enable Select this check box to allow the CellPipe 7130 RG to convert wireless Wireless multicast traffic into wireless unicast traffic. Multicast...
Select No Security to allow wireless devices to communicate with the access points without any data encryption or authentication. Note: If you do not enable any wireless security on your CellPipe 7130 RG, your network is accessible to any wireless networking device that is within range.
Figure 41 Wireless LAN > General: Static WEP Encryption The following table describes the wireless LAN security labels in this screen. Table 31 Network > Wireless LAN > General: Static WEP Encryption LABEL DESCRIPTION Security Choose WEP from the drop-down list box. Mode CellPipe 7130 RG User’s Guide...
Key 1 to Key The WEP key is used to secure your data from eavesdropping by unauthorized wireless users. Both the CellPipe 7130 RG and the wireless stations must use the same WEP key for data transmission. Only one key can be activated at any one time. Select a default key to use for data encryption.
Auto Generate This field is only available for WPA-PSK. Select this option to have the CellPipe 7130 RG automatically generate an SSID and pre-shared key. The SSID and Pre-Shared Key fields will not be configurable when you select this option.
Page 149
Chapter 7 Wireless LAN Note: If you select WPA or WPA2 in the Wireless LAN > General screen, the WDS and WPS features are not available on the CellPipe 7130 RG. Figure 43 Wireless LAN > General: WPA(2) The following table describes the wireless LAN security labels in this screen.
CellPipe 7130 RG. The key is not sent over the network. 7.4.5 MAC Filter This screen allows you to configure the CellPipe 7130 RG to give exclusive access to specific devices (Allow) or exclude specific devices from accessing the CellPipe 7130 RG (Deny).
Chapter 7 Wireless LAN Use this screen to change your CellPipe 7130 RG’s MAC filter settings. Click the Edit button in the Wireless LAN > General screen. The following screen displays. Figure 44 Wireless LAN > MAC Filter The following table describes the labels in this screen.
Enter the MAC addresses of the wireless devices that are allowed or denied Address access to the CellPipe 7130 RG in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Table 36 Network > Wireless LAN > More AP LABEL DESCRIPTION Apply Click Apply to save your changes back to the CellPipe 7130 RG. Reset Click Reset to reload the previous configuration for this screen. 7.5.1 More AP Edit Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen.
Page 154
WPS. The PIN is not necessary when you use WPS push-button method. Generate Click this button to have the CellPipe 7130 RG create a new PIN. WPS Status This displays Configured when the CellPipe 7130 RG has connected to a wireless network using WPS or Enable WPS is selected and wireless or wireless security settings have been changed.
Configuration (PBC) or PIN Configuration. Note: If you select No Security in the Wireless LAN > General screen and click Push Button in the WPS Station screen, the CellPipe 7130 RG automatically changes to use WPA-PSK/WPA2-PSK mixed mode and generates a pre- shared key.
Note: You cannot use WDS when WPS is enabled or wireless security is set to “WPA" or "WPA2". The wireless security settings apply to both WDS links and the connections between the CellPipe 7130 RG and any wireless clients. Note: At the time of writing, WDS is only compatible with other CellPipe 7130 RGs of the same model.
Page 157
Select Enabled(Scan) to turn on WDS, search and display the available APs within range in the table below. Remote Bridges Enter the MAC address of the peer device that your CellPipe 7130 RG MAC Address wants to make a bridge connection with.
Allowed Output Power Set the output power of the CellPipe 7130 RG. If there is a high density of APs in an area, decrease the output power to reduce interference with other APs. Select one of the following 20%, 40%, 60%, 80% or 100%.
Select 802.11g Only to allow IEEE 802.11g compliant WLAN devices to associate with the CellPipe 7130 RG. IEEE 802.11b compliant WLAN devices can associate with the CellPipe 7130 RG only when they use the short premble type. Select 802.11n Only to only allow IEEE 802.11n compliant WLAN devices to associate with the CellPipe 7130 RG.
The wireless network is the part in the blue circle. In this wireless network, devices A and B use the access point (AP) to interact with the other devices (such as the printer) or with the Internet. Your CellPipe 7130 RG is the AP. Every wireless network must follow these basic guidelines.
7.10.3.1 SSID Normally, the CellPipe 7130 RG acts like a beacon and regularly broadcasts the SSID in the area. You can hide the SSID instead, in which case the CellPipe 7130 RG does not broadcast the SSID. In addition, you should change the default SSID to something that is difficult to guess.
User’s Guide or other documentation. You can use the MAC address filter to tell the CellPipe 7130 RG which devices are allowed or not allowed to use the wireless network. If a device is allowed to use the wireless network, it still has to have the correct information (SSID, channel, and security).
Usually, you should set up the strongest encryption that every device in the wireless network supports. For example, suppose you have a wireless network with the CellPipe 7130 RG and you do not have a RADIUS server. Therefore, there is no authentication. Suppose the wireless network has two devices. Device A only supports WEP, and device B supports WEP and WPA.
Look for a WPS button on each device. If the device does not have one, log into its configuration utility and locate the button (see the device’s User’s Guide for how to do this - for the CellPipe 7130 RG, see Section 7.7 on page 155).
Page 165
Look for the client’s WPS PIN; it will be displayed either on the device, or in the WPS section of the client’s configuration interface (see the device’s User’s Guide for how to find the WPS PIN - for the CellPipe 7130 RG, see Section 7.6 on page 153).
PSK or WPA2-PSK pre-shared key to the enrollee. Whether WPA-PSK or WPA2-PSK is used depends on the standards supported by the devices. If the registrar is already part of a network, it sends the existing information. If not, it generates the SSID and WPA(2)-PSK randomly. CellPipe 7130 RG User’s Guide...
Page 167
It will be the registrar in all subsequent WPS connections in which it is involved. If you want a configured AP to act as an enrollee, you must reset it to its factory defaults. CellPipe 7130 RG User’s Guide...
Page 168
ENROLLEE CLIENT 2 In step 3, you add another access point (AP2) to your network. AP2 is out of range of AP1, so you cannot use AP1 for the WPS handshake with the new access CellPipe 7130 RG User’s Guide...
(if the device supports this feature). Then, you can enter the key into the non-WPS device and join the network as normal (the non-WPS device must also support WPA-PSK or WPA2-PSK). CellPipe 7130 RG User’s Guide...
Page 170
Check the MAC addresses of your wireless clients (usually printed on a label on the bottom of the device). If there is an unknown MAC address you can remove it or reset the AP. CellPipe 7130 RG User’s Guide...
172). • The DMZ Host screen lets you configure a default server (Section 8.4 on page 176). • The ALG screen lets you enable SIP ALG on the CellPipe 7130 RG (Section 8.5 on page 177). 8.2 What You Need to Know The following terms and concepts may help as you read through this chapter.
If you are unsure, refer to your ISP. To access this screen, click Network > NAT. The following screen appears. Figure 58 NAT Port Forwarding CellPipe 7130 RG User’s Guide...
Page 173
To forward a series of ports, enter the last port number in a series that begins with the port number in the External Port Start field above. Internal Port Enter the port number to which you want the CellPipe 7130 RG to Start translate the incoming port.
Page 174
Click the Remove icon to delete an existing port forwarding rule. Note that subsequent rules move up by one when you take this action. Apply Click Apply to save your changes back to the CellPipe 7130 RG. Cancel Click Cancel to return to the previous configuration.
External Start Port field above. Internal Start Enter the port number here to which you want the CellPipe 7130 RG to Port translate the incoming port. For a range of ports, enter the first number of the range to which you want the incoming ports translated.
Select each day of the week the recurring schedule is effective. Back Click Back to return to the previous screen. Apply Click Apply to save your changes back to the CellPipe 7130 RG. Cancel Click Cancel to begin configuring this screen afresh. 8.4 The DMZ Host Screen In addition to the servers for specified services, NAT supports a default server IP address.
IP address inside the SIP data stream to a public IP address. You do not need to use STUN or an outbound proxy if you enable the SIP ALG. Use this screen to enable or disable the SIP ALG in the CellPipe 7130 RG. To access this screen, click NAT > ALG.
Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the example), port 80 to another (B in the example) and assign a default server IP address of 192.168.1.35 to a third (C in the example). You assign the LAN IP CellPipe 7130 RG User’s Guide...
Page 179
ISP assigns the WAN IP address. The NAT network appears as a single host on the Internet. Figure 62 Multiple Servers Behind NAT Example A=192.168.1.33 192.168.1.1 B=192.168.1.34 IP address assigned by ISP C=192.168.1.35 D=192.168.1.36 CellPipe 7130 RG User’s Guide...
Share files on a USB memory stick or hard drive connected to your CellPipe 7130 RG with users on your network. The following figure is an overview of the CellPipe 7130 RG’s file server feature. Computers A and B can access files on a USB device (C) which is connected to the CellPipe 7130 RG.
Microsoft Windows for file and printer access; therefore, CIFS will allow all applications, not just Web browsers, to open and share files across the Internet. The CellPipe 7130 RG uses Common Internet File System (CIFS) protocol for its file sharing functions. CIFS compatible computers can access the USB file storage devices connected to the CellPipe 7130 RG.
9.1.3 Before You Begin Make sure the CellPipe 7130 RG is connected to your network and turned on. Connect the USB device to one of the CellPipe 7130 RG’s USB ports. Make sure the CellPipe 7130 RG is connected to your network.
Host Name This displays the CellPipe 7130 RG system name. Workgroup You can add the CellPipe 7130 RG to an existing or a new workgroup on Name your network. Enter the name of the workgroup which your CellPipe 7130 RG automatically joins.
Page 185
Figure 65 File Sharing via Windows Explorer Note: Once you log in to the file share via your CellPipe 7130 RG, you do not have to log in again unless you restart your computer. Note: Refer to Section 3.2 on page 83...
The media server feature lets anyone on your network play video, music, and photos from a USB storage device connected to your CellPipe 7130 RG (without having to copy them to another computer). The CellPipe 7130 RG can function as a DLNA-compliant media server. The CellPipe 7130 RG streams files to DLNA- compliant media clients, such as the Xbox 360, Playstation 3 and so on.
10.1.2 Before You Begin Make sure the CellPipe 7130 RG is connected to your network and turned on. Connect the USB device to one of the CellPipe 7130 RG’s USB ports. Make sure the CellPipe 7130 RG is connected to your network.
Click this to set every field in this screen to its last-saved value. 10.3 The Remove Disk Safely Screen Use this screen to safely remove the USB device from the CellPipe 7130 RG. This stops processes to the USB device and prevents your data from being corrupted.
Page 190
Chapter 10 Media Server CellPipe 7130 RG User’s Guide...
H A P T E R Firewall 11.1 Overview This chapter shows you how to enable and configure the CellPipe 7130 RG firewall settings. The CellPipe 7130 RG firewall is a packet filtering firewall and restricts access based on the source/destination computer network address of a packet and the type of application.
Page 192
These custom rules work by comparing the Source IP address, Destination IP address and IP protocol type of network traffic to rules set by the administrator. Your customized rules take precedence and override the CellPipe 7130 RG’s default rules. Denial of Service (DoS) Denial of Service (DoS) prevents customers, users, clients or other computers from accessing data on a computer.
DESCRIPTION Active Firewall Select this check box to enable the firewall on the CellPipe 7130 RG. When the firewall is enabled, the CellPipe 7130 RG blocks all incoming traffic from the WAN to the LAN. Create custome rules below to allow certain WAN users to access your LAN or to allow traffic from the WAN to a certain computer on the LAN.
Click Add to create a new rule. Apply Click Apply to save your changes back to the CellPipe 7130 RG. 11.3.1 Creating Incoming Firewall Rules In the Incoming screen, click Add to display this screen and refer to the following table for information on the labels.
Click Apply to save your customized settings and exit this screen. 11.4 The DoS Screen Click Security > Firewall > DoS to display the following screen. This lets you turn on protection against DoS attacks. Figure 71 Security > Firewall > DoS CellPipe 7130 RG User’s Guide...
Page 196
Table 54 Security > Firewall > DoS LABEL DESCRIPTION Active DoS Select this check box to detect and reject old or duplicate packets to protect against Denial-of-Service attacks Apply Click Apply to save your changes back to the CellPipe 7130 RG. CellPipe 7130 RG User’s Guide...
Certificate 12.1 Overview The CellPipe 7130 RG can use certificates (also called digital IDs) to authenticate users. Certificates are based on public-private key pairs. A certificate contains the certificate owner’s identity and public key. Certificates provide a way to exchange public keys for use in authentication.
12.3 The Local Certificates Screen Click Security > Certificates to open the Local Certificates screen. This is the CellPipe 7130 RG’s summary list of certificates and certification requests. Figure 72 Local Certificates The following table describes the labels in this screen.
Organization Name Type up to 127 characters to identify the company or group to which the certificate owner belongs. You may use any character, including spaces, but the CellPipe 7130 RG drops trailing spaces. State/Province Type up to 127 characters to identify the state or province where the Name certificate owner is located.
12.3.2 Import Certificate Click Security > Certificates > Local Certificates and then Import Certificate to open the Import Local Certificate screen. Follow the instructions in this screen to save an existing certificate to the CellPipe 7130 RG. CellPipe 7130 RG User’s Guide...
Page 201
Copy and paste the private key into the text box to store it on the CellPipe 7130 RG. Back Click Back to return to the previous screen. Apply Click Apply to save the certificate on the CellPipe 7130 RG. CellPipe 7130 RG User’s Guide...
Click Security > Certificates > Local Certificates to open the My Certificates screen (see Figure 72 on page 198). Click the View icon to open the Certificate Details screen. Use this screen to view in-depth certificate information and change the certificate’s name. Figure 76 Certificate Details CellPipe 7130 RG User’s Guide...
Click this to import a certificate signed by the CA to replace the request. 12.3.4 Load Signed Certificate Click Security > Certificates > Local Certificates and then Load Signed or the Load Signed Certificate button in the Certificate Details screen of a CellPipe 7130 RG User’s Guide...
Click Advanced Setup > Certificates > Trusted CA to open the following screen. This screen displays a summary list of certificates of the certification authorities that you have set the CellPipe 7130 RG to accept as trusted. The CellPipe 7130 RG accepts any valid certificate signed by a certification authority on...
Page 205
Click Remove to delete the certificate. Import Click this button to open a screen where you can save the certificate of Certificate a certification authority that you trust to the CellPipe 7130 RG. CellPipe 7130 RG User’s Guide...
This field displays general information about the certificate. ca means that a Certification Authority signed the certificate. Subject This field displays information that identifies the owner of the certificate, such as Common Name (CN), Organizational Unit (OU), Organization (O) and Country (C). CellPipe 7130 RG User’s Guide...
12.4.2 Import Trusted CA Certificate Click the Import Certificate button in the Trusted CA screen to open the following screen. The CellPipe 7130 RG trusts any valid certificate signed by any of the imported trusted CA certificates. Figure 80 Trusted CA: Import Certificate The following table describes the fields in this screen.
The CellPipe 7130 RG usually uses the default gateway to route outbound traffic from computers on the LAN to the Internet. To have the CellPipe 7130 RG send data to devices not reachable through the default gateway, use static routes.
This is the WAN interface through which the traffic is routed. Remove Click the icon to remove a static route from the CellPipe 7130 RG. A window displays asking you to confirm that you want to delete the route. Click this to create a new rule.
RG's interface(s). The gateway helps forward packets to their destinations. Back Click Back to return to the previous screen without saving. Apply Click Apply to save your changes back to the CellPipe 7130 RG. Cancel Click Cancel to begin configuring this screen afresh. CellPipe 7130 RG User’s Guide...
Traditionally, routing is based on the destination address only and the CellPipe 7130 RG takes the shortest path to forward a packet. Policy forwarding allows the CellPipe 7130 RG to override the default routing behavior and alter the packet forwarding based on the policy defined by the network administrator. Policy-based routing is applied to outgoing packets, prior to the normal routing.
This is the WAN interface through which the traffic is routed. Remove Click the icon to remove a rule from the CellPipe 7130 RG. A window displays asking you to confirm that you want to delete the rule. Click this to create a new rule.
Page 215
Chapter 14 Policy Forwarding Table 66 Policy Forwarding: Add LABEL DESCRIPTION Apply Click Apply to save your changes back to the CellPipe 7130 RG. Cancel Click Cancel to begin configuring this screen afresh. CellPipe 7130 RG User’s Guide...
Routing Information Protocol (RIP, RFC 1058 and RFC 1389) allows a device to exchange routing information with other routers. 15.1.1 What You Can Do in this Chapter The RIP screen lets you set up RIP settings on the CellPipe 7130 RG (Section 15.2 on page 217).
Page 218
Version The RIP version controls the format and the broadcasting method of the RIP packets that the CellPipe 7130 RG sends (it recognizes both formats when receiving). RIP version 1 is universally supported but RIP version 2 carries more information. RIP version 1 is probably adequate for most networks, unless you have an unusual network topology.
Configure classifiers to sort traffic into different flows. Assign priority and define actions to be performed for a classified traffic flow. The CellPipe 7130 RG assigns each packet a priority and then queues the packet accordingly. Packets assigned a high priority are processed more quickly than those with low priority if there is congestion, allowing time-sensitive applications to flow more smoothly.
• The Policer Setup screen lets you specify the committed rate and committed burst size for incoming packets (Section 16.5 on page 225). • The Monitor screen lets you view the CellPipe 7130 RG's QoS-related packet statistics (Section 16.7 on page 233).
Click Advanced Setup > Quality of Service to open the screen as shown next. Use this screen to enable or disable QoS and set the upstream bandwidth. See Section 16.1 on page 219 for more information. Figure 87 QoS General CellPipe 7130 RG User’s Guide...
100 Mbps. You can set this number higher than the interface’s actual transmission speed. The CellPipe 7130 RG uses up to 95% of the DSL port’s actual upstream transmission speed even if you set this number higher than the DSL port’s actual transmission speed.
Page 223
Select the check box to enable the queue. Name This shows the descriptive name of this queue. Interface This shows the name of the CellPipe 7130 RG’s interface through which traffic in this queue passes. Priority This shows the priority of this queue.
Weight Select the weight (from 1 to 8) of this queue. If two queues have the same priority level, the CellPipe 7130 RG divides the bandwidth across the queues according to their weights. Queues with larger weights get more bandwidth than queues with smaller weights.
(such as Telnet) to form a flow. You can give different priorities to traffic that the CellPipe 7130 RG forwards out through the WAN interface. Give high priority to voice and video to make them run more smoothly.
Page 226
Click the Remove icon to delete an existing classifier. Note that subsequent rules move up by one when you take this action. Apply Click Apply to save your changes back to the CellPipe 7130 RG. CellPipe 7130 RG User’s Guide...
Chapter 16 Quality of Service (QoS) 16.5.1 QoS Class Edit Click the Add button or the Edit icon in the Class Setup screen to configure a classifier. Figure 91 QoS Class Setup: Add CellPipe 7130 RG User’s Guide...
Page 228
This field is available only when you select the Ether Type check box. If you select Mark, enter a DSCP value with which the CellPipe 7130 RG replaces the DSCP field in the packets. If you select Unchange, the CellPipe 7130 RG keep the DSCP field in the packets. 802.1p Mark Select a priority level with which the CellPipe 7130 RG replaces the IEEE 802.1p priority field in the packets.
Page 229
If you select TCP or UDP in the IP Protocol field, select the check Range box and enter the port number(s) of the source. Exclude Select this option to exclude the packets that match the specified criteria from this classifier. Others CellPipe 7130 RG User’s Guide...
Page 230
Back Click Back to return to the previous screen without saving. Apply Click Apply to save your changes back to the CellPipe 7130 RG. Cancel Click Cancel to begin configuring this screen afresh. CellPipe 7130 RG User’s Guide...
Chapter 16 Quality of Service (QoS) 16.6 The Policer Setup Screen Click QoS > Policer Setup to open the following screen. The CellPipe 7130 RG can control ingress (or incoming) traffic by dropping packets that exceed the committed rate and/or committed burst size specified in this screen.
Enter the the maximum committed burst size for the class/es. Burst Size Available Class This shows all the classes created in the CellPipe 7130 RG. Select the class that you want to include in the policy and click Add to move it to selected class.
Cancel Click Cancel to begin configuring this screen afresh. 16.7 The QoS Monitor Screen To view the CellPipe 7130 RG’s QoS packet statistics, click Advanced > QoS > Monitor. The screen appears as shown. Figure 94 QoS > Monitor The following table describes the labels in this screen.
Page 234
In addition, applications do not have to request a particular service or give advanced notice of where the traffic is going. CellPipe 7130 RG User’s Guide...
Page 235
DiffServ network. Based on the marking rule, different kinds of traffic can be marked for different kinds of forwarding. Resources can then be allocated according to the DSCP values and the configured policies. CellPipe 7130 RG User’s Guide...
Page 236
Chapter 16 Quality of Service (QoS) CellPipe 7130 RG User’s Guide...
Use the Dynamic DNS screen (Section 17.3 on page 238) to enable DDNS and configure the DDNS settings on the CellPipe 7130 RG. 17.2 What You Need To Know DYNDNS Wildcard Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be aliased to the same IP address as yourhost.dyndns.org.
Chapter 17 Dynamic DNS Setup 17.3 The Dynamic DNS Screen To change your CellPipe 7130 RG’s DDNS, click Advanced > Dynamic DNS. The screen appears as shown. Figure 95 Advanced > Dynamic DNS The following table describes the fields in this screen.
ACS and a client device. RPCs are sent in Extensible Markup Language (XML) format over HTTP or HTTPS. An administrator can use an ACS to remotely set up the CellPipe 7130 RG, modify settings, perform firmware upgrades as well as monitor and diagnose the CellPipe...
Page 240
ACS IP address or domain name and username and password. Click Advanced > Remote MGMT to open the following screen. Use this screen to configure your CellPipe 7130 RG to be managed by an ACS. Figure 96 TR-069 The following table describes the fields in this screen.
The ACS can use this URL to make a connection request to the CellPipe 7130 RG. Apply Click this button to save your changes back to the CellPipe 7130 RG. Cancel Click Cancel to begin configuring this screen afresh. 18.3 The TR-064 Screen TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum.
This is the index number of the entry. Services This is the service you may use to access the CellPipe 7130 RG. Select the Enable check box for the corresponding services that you want to allow access to the CellPipe 7130 RG from the LAN.
Click Advanced > Remote MGMT > IP Address to open the following screen. Use this screen to specify the “trusted” computers from which an administrator may use a service to manage the CellPipe 7130 RG. Figure 99 IP Address The following table describes the fields in this screen.
Enter the IP address of the trusted computer from which you can manage the CellPipe 7130 RG. Apply/Save Click this button to save your changes back to the CellPipe 7130 RG. Back Click this button to return to the previous screen without saving.
In turn, a device can leave a network smoothly and automatically when it is no longer in use. 19.1.1 What You Can Do in this Chapter The UPnP screen lets you enable UPnP on the CellPipe 7130 RG (Section 19.3 on page 246).
When a UPnP device joins a network, it announces its presence with a multicast message. For security reasons, the CellPipe 7130 RG allows multicast messages on the LAN only. All UPnP-enabled devices may communicate freely with each other without additional configuration.
(although you must still enter the password to access the web configurator). Apply/Save Click this to save the setting to the CellPipe 7130 RG. 19.4 Installing UPnP in Windows Example This section shows how to install UPnP in Windows Me and Windows XP.
Page 248
Click OK to go back to the Add/Remove Programs Properties window and click Next. Restart the computer when prompted. Installing UPnP in Windows XP Follow the steps below to install the UPnP in Windows XP. Click Start and Control Panel. Double-click Network Connections. CellPipe 7130 RG User’s Guide...
Page 249
Optional Networking Components …. Figure 104 Network Connections The Windows Optional Networking Components Wizard window displays. Select Networking Service in the Components selection box and click Details. Figure 105 Windows Optional Networking Components Wizard CellPipe 7130 RG User’s Guide...
UPnP installed in Windows XP and UPnP activated on the CellPipe 7130 RG. Make sure the computer is connected to a LAN port of the CellPipe 7130 RG. Turn on your computer and the CellPipe 7130 RG. Auto-discover Your UPnP-enabled Network Device Click Start and Control Panel.
Page 251
Chapter 19 Universal Plug-and-Play (UPnP) Right-click the icon and select Properties. Figure 107 Network Connections In the Internet Connection Properties window, click Settings to see the port mappings there were automatically created. Figure 108 Internet Connection Properties CellPipe 7130 RG User’s Guide...
Page 252
You may edit or delete the port mappings or click Add to manually add port mappings. Figure 109 Internet Connection Properties: Advanced Settings Figure 110 Internet Connection Properties: Advanced Settings: Add When the UPnP-enabled device is disconnected from your computer, all port mappings will be deleted automatically. CellPipe 7130 RG User’s Guide...
Page 253
With UPnP, you can access the web-based configurator on the CellPipe 7130 RG without finding out the IP address of the CellPipe 7130 RG first. This comes helpful if you do not know the IP address of the CellPipe 7130 RG.
Page 254
Chapter 19 Universal Plug-and-Play (UPnP) Select My Network Places under Other Places. Figure 113 Network Connections An icon with the description for each UPnP-enabled device displays under Local Network. CellPipe 7130 RG User’s Guide...
Page 255
Chapter 19 Universal Plug-and-Play (UPnP) Right-click on the icon for your CellPipe 7130 RG and select Invoke. The web configurator login screen displays. Figure 114 Network Connections: My Network Places Right-click on the icon for your CellPipe 7130 RG and select Properties. A properties window displays with basic information about the CellPipe 7130 RG.
20.1 Overview Parental control allows you to block web sites with the specific URL. You can also define time periods and days during which the CellPipe 7130 RG performs parental control on a specific user. 20.1.1 What You Can Do in this Chapter •...
Click the Remove icon to delete an existing schedule. Click Add to create a new schedule. Apply Click Apply to save your changes back to the CellPipe 7130 RG. 20.2.1 Adding a Schedule Click the Add button in the Time Restriction screen to open the following screen.
MAC Address Enter the MAC address of the LAN user’s computer to which this schedule applies. Days of the week Select check boxes for the days that you want the CellPipe 7130 RG to perform parental control. Start Blocking Enter the time period of each day, in 24-hour format, during which Time parental control will be enforced.
LABEL DESCRIPTION Active Filter Select the check box to enable URL filtering on the CellPipe 7130 RG. Blocking list The table shows the keywords contained in the URL that the CellPipe 7130 RG prohibits the users from viewing. It also shows through which port the keyword is blocked.
IGMP (Section 21.2 on page 263). • The IGMP Source Configuration screen lets you set the server where the CellPipe 7130 RG gets the multicast group information (Section 21.2 on page 263). 21.1.2 What You Need to Know...
Page 262
There should only be one upstream interface (also known as the query port) for one query VLAN on the CellPipe 7130 RG. A downstream interface is a port that connects to a host (such as a computer).
Proxy Hosts The CellPipe 7130 RG will not respond to IGMP join and leave messages on the upstream interface. The CellPipe 7130 RG only responds to IGMP query messages on the upstream interface. The CellPipe 7130 RG sends IGMP query messages to the hosts that are members of the query VLAN.
Page 264
If you would like to read more detailed information about interoperability between IGMP version 2 and version 1, please see sections 4 and 5 of RFC 2236. Select the IGMP version that you would like the CellPipe 7130 RG to use. Query Interval...
Click this button to save your settings back to the CellPipe 7130 RG. 21.3 Interface Source Configuration Use this screen to configure the server where the CellPipe 7130 RG gets the multicast group information. Click Advanced > IGMP Source Configuration to open the following screen.
Click this button to create a new rule. Apply Click this button to save your settings back to the CellPipe 7130 RG. 21.3.1 Add/Edit IGMP Source Click the Add button or Edit icon in the IGMP Source Configuration screen to open the following.
(Section 22.3 on page 269). 22.2 The General Screen Use the General screen to configure system settings such as the system password. Click Maintenance > System to open the General screen. Figure 124 Maintenance > System > General CellPipe 7130 RG User’s Guide...
Page 268
Type the new password again for confirmation. Confirm Web Session Timeout Timeout Value Enter how many minutes of inactivity the CellPipe 7130 RG waits before (sec) automatically disconnecting a session. You need to enter the username and password again before accessing the Web Configurator. Apply Click Apply to save your changes back to the CellPipe 7130 RG.
Manual Select this option to enter the time and date manually. Get from Time Select this option to have the CellPipe 7130 RG get the time and date Server from the time server you specified below. CellPipe 7130 RG User’s Guide...
Page 270
Time zone offset Choose the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). Apply Click Apply to save your changes back to the CellPipe 7130 RG. Cancel Click Cancel to begin configuring this screen afresh.
CellPipe 7130 RG’s logs. The web configurator allows you to choose which categories of events and/or alerts to have the CellPipe 7130 RG log and then display the logs or have the CellPipe 7130 RG send them to a syslog server.
This field states the reason for the log. 23.3 The Log Settings Screen Use the Log Settings screen to configure to where the CellPipe 7130 RG is to send logs and which logs and/or immediate alerts the CellPipe 7130 RG is to record and display.
Page 273
Select to enable or disable system logging. Log Level Select the severity level of the logs that you want the CellPipe 7130 RG to display, record and send to the log server. The CellPipe 7130 RG displays and records the logs with the severity level equal to or higher than what you selected.
• The Configuration screen lets you backup and restore device configurations (Section 24.3 on page 278). You can also reset your device settings back to the factory default. • The Restart screen lets you restart your CellPipe 7130 RG (Section 24.4 on page 280).
24.2 The Firmware Screen Click Maintenance > Tools to open the Firmware screen. Follow the instructions in this screen to upload firmware to your CellPipe 7130 RG. The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes.
Page 277
CellPipe 7130 RG again. Figure 129 Firmware Upload In Progress The CellPipe 7130 RG automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.
Backup Configuration Backup Configuration allows you to back up (save) the CellPipe 7130 RG’s current configuration to a file on your computer. Once your CellPipe 7130 RG is configured and functioning properly, it is highly recommended that you back up your configuration file before making configuration changes.
Page 279
CellPipe 7130 RG again. Figure 133 Configuration Upload Successful The CellPipe 7130 RG automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 135 Configuration Upload Error Reset to Factory Defaults Click the Reset button to clear all user-entered configuration information and return the CellPipe 7130 RG to its factory defaults. The following warning screen appears. Figure 136 Reset Warning Message You can also press the RESET button on the rear panel to reset the factory defaults of your CellPipe 7130 RG.
Page 281
Chapter 24 Tools Click Maintenance > Tools > Restart. Click Restart to have the CellPipe 7130 RG reboot. This does not affect the CellPipe 7130 RG's configuration. Figure 137 Maintenance > Tools >Restart CellPipe 7130 RG User’s Guide...
Point (MEP) ports on the device under a Maintenance Domain (MD) level. An MEP port has the ability to send Connectivity Check Messages (CCMs) and get other MEP ports information from neighbor devices’ CCMs within an MA. CFM provides two tests to discover connectivity faults. CellPipe 7130 RG User’s Guide...
Ping Click this button to ping the IP address that you entered. Traceoute Click this button to perform the traceroute function. This determines the path a packet takes to the specified host. CellPipe 7130 RG User’s Guide...
Domain (MD) Name The combined length of the MD Name and MA name must be less or equal to 44bytes. Maintenance Select a level (0-7) under which you want to create an MA. Domain (MD) Level CellPipe 7130 RG User’s Guide...
Page 286
(MD). Options are VID, String and Format Integer. If you select VID or Integer, the CellPipe 7130 RG adds the VLAN ID you specified for an MA in the CCM. If you select String, the CellPipe 7130 RG adds the MA name you specified above in the CCM.
Use this screen to perform an OAM (Operation, Administration and Maintenance) F4 or F5 loopback test on a PVC. The CellPipe 7130 RG sends an OAM F4 or F5 packet to the DSLAM or ATM switch and then returns it to the CellPipe 7130 RG.
Page 288
ATM device. End-to-end loopback tests allow you to verify integrity of an end-to- end PVC. Note: The DSLAM to which the CellPipe 7130 RG is connected must also support ATM F4 and/or F5 to use this test. Note: This screen is available only when you configure an ATM layer-2 interface.
Make sure you are using the power adaptor or cord included with the CellPipe 7130 RG. Make sure the power adaptor or cord is connected to the CellPipe 7130 RG and plugged in to an appropriate power source. Make sure the power source is turned Turn the CellPipe 7130 RG off and on.
If you changed the IP address and have forgotten it, you might get the IP address of the CellPipe 7130 RG by looking up the IP address of the default gateway for your computer. To do this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig.
Page 291
• If your computer is connected to the WAN port or is connected wirelessly, use a computer that is connected to an ETHERNET port. • Try to access the CellPipe 7130 RG using another service, such as Telnet. If you can access the CellPipe 7130 RG, check the remote management settings and firewall rules to find out why the CellPipe 7130 RG does not respond to HTTPS.
Make sure your computer is connected to a LAN port in the default group. Otherwise, you need to use the CellPipe 7130 RG’s LAN IP address for the new group to access the CellPipe 7130 RG again. 26.3 Internet Access I cannot access the Internet.
Page 293
Check if you have set the Network > WAN > Mode screen to WAN to have the CellPipe 7130 RG use the Ethernet WAN port for Internet access. Make sure you connect the Ethernet WAN port to a DSL modem or router in your netwrok.
Page 294
Check the signal strength. If the signal strength is low, try moving your computer closer to the CellPipe 7130 RG if possible, and look around to see if there are any devices that might be interfering with the wireless network (for example, microwaves, other wireless networks, and so on).
Re-connect your USB device to the CellPipe 7130 RG. 26.5 Wireless LAN Troubleshooting I cannot access the CellPipe 7130 RG or ping any computer from the WLAN (wireless AP or router). Make sure the wireless LAN is enabled on the CellPipe 7130 RG.
Page 296
You can use WDS only when WPS is disabled or wireless security is set to “No Security”, “WEP”, “WPA-PSK” or “WPA2-PSK”. The wireless security settings apply to both WDS links and the connections between the CellPipe 7130 RG and any wireless clients.
H A P T E R Product Specifications The following tables summarize the CellPipe 7130 RG’s hardware and firmware features. 27.1 Hardware Specifications Table 100 Hardware Specifications Dimensions 208 (W) x 178 (D) x 36 (H) mm Weight 465 g Power Specification 12 V 1.5 A...
Configuration Backup Make a copy of the CellPipe 7130 RG’s configuration. You can put & Restoration it back on the CellPipe 7130 RG later if you decide to revert back to an earlier configuration. HomePNA (Home Extend your Internet connection to the coaxial outlets in your...
Page 299
Chapter 27 Product Specifications Table 101 Firmware Specifications (continued) DHCP (Dynamic Host Use this feature to have the CellPipe 7130 RG assign IP addresses, Configuration an IP default gateway and DNS servers to computers on your Protocol) network. Your device can also act as a surrogate DHCP server (DHCP Relay) where it relays IP address assignment from the actual real DHCP server to the clients.
Page 300
Support for ITU-T G.INP Dying Gasp support Modulation : Multi-Carrier-Modulation (MCM) Interleaving: General Convolution Support of maximum SNRM configuration (directed by the central office) Seamless Rate Adaptation (SRA) as described in Amendment 1 of G.993.2 Tone Spacing: 4.3KHz/8.6KHz CellPipe 7130 RG User’s Guide...
Page 301
RIP I/RIP II ICMP ATM QoS IP Multicasting IGMP v2 and v3 IGMP Proxy Management Embedded Web Configurator Remote Firmware Upgrade Embedded FTP/TFTP Server for firmware upgrade and configuration file backup and restore Syslog TR-069 TR-064 CellPipe 7130 RG User’s Guide...
Page 302
ITU G.992.5 (ADSL2+) ITU standard (also referred to as ADSL2+) that extends the capability of basic ADSL by doubling the number of downstream bits. ITU-T G.993.2 ITU standard that defines VDSL2. (VDSL2) TR-069 DSL Forum Standard for CPE Wan Management. TR-064 DSL Forum LAN-Side DSL CPE Configuration CellPipe 7130 RG User’s Guide...
TCP/IP networking component installed and properly configured for your network adapter. Click Start > Control Panel > Network Connections and then open a Local Area Connection to display the following screen. Figure 142 TCP/IP Networking Component CellPipe 7130 RG User’s Guide...
Page 306
Command descriptions always indicate the default syntax you must use when entering them on the command line. Some commands require additional parameters in order to execute properly. Some may have optional parameters. Parameters are displayed as follows: command [parameter] CellPipe 7130 RG User’s Guide...
Page 308
Default Gateway ..: In some cases, your computer may be properly connected to the network or the CellPipe 7130 RG but it is not receiving an IP address for whatever reason. Use the /release parameter followed by /renew: C:\>ipconfig /release...
Page 309
The ping command line utility allows you to verify the connection and latency between your computer and either the CellPipe 7130 RG or other devices on the network. If you cannot reach a target using this command, then it may indicate possible network trouble.
Page 310
A long ping response could indicate network problems: • on your side of the connection • between the start and end points of the connection • on the receiving end To determine where the slowdown is, you may need to use traceroute. CellPipe 7130 RG User’s Guide...
Page 311
Syntax: tracert target The target can be an IP address or a host name. Parameters: tracert [-d] [-h maximumhops ] target There are other parameters but these are the only ones you need to use for now. CellPipe 7130 RG User’s Guide...
Page 312
If you were having connection problems, this would most likely be the source of it. For whatever reason, the server in Japan has a less than optimal connection with its counterpart in the United States. CellPipe 7130 RG User’s Guide...
Page 313
IP address to remove just that IP address (inet_addr). The - s parameter allows you to add entries based on IP address (inet_addr) and/or MAC address (eth_addr). There are other parameters but these are the only ones you need to use for now. CellPipe 7130 RG User’s Guide...
Page 314
Change the IP address on either computer to an unused one to fix this problem. route The route command line utility allows you to display or adjust your computer’s network table. The routing table on your computer contains the default gateway CellPipe 7130 RG User’s Guide...
Page 315
The destination 255.255.255.255 is used to find computers when an IP address is not known. For example, before the DHCP IP address of your computer is determined, your computer sends packets with the destination looking for DHCP servers on the network. CellPipe 7130 RG User’s Guide...
Page 316
• To add a persistent route to the destination 172.16.3.0 with the subnet mask of 255.255.255.0 and the next hop address of 172.16.1.252, type: route -p add 172.16.3.0 mask 255.255.255.0 172.16.1.252. Note that the metric will be set to 1 if you do not specify any. CellPipe 7130 RG User’s Guide...
Page 317
ESTABLISHED COMPUTERA:3244 localhost:3243 ESTABLISHED COMPUTERA:3246 localhost:3247 ESTABLISHED COMPUTERA:3247 localhost:3246 ESTABLISHED COMPUTERA:5091 localhost:1056 ESTABLISHED COMPUTERA:5152 localhost:3245 CLOSE_WAIT COMPUTERA:27015 localhost:1091 ESTABLISHED COMPUTERA:40000 localhost:1120 ESTABLISHED COMPUTERA:3229 172.20.0.201:http CLOSE_WAIT COMPUTERA:3234 172.16.1.29:1155 ESTABLISHED COMPUTERA:3237 172.16.1.29:1155 ESTABLISHED COMPUTERA:3240 172.16.1.29:1155 ESTABLISHED C:\> CellPipe 7130 RG User’s Guide...
Page 318
LISTENING A computer with an IP address of 172.16.1.29 is accessing the web service on the COMPUTERA. COMPUTERA:http 172.16.1.29:4036 ESTABLISHED COMPUTERA has established a TCP/IP NETBIOS connection (microsoft-ds) with a NAS device. COMPUTERA:2744 NAS:microsoft-ds ESTABLISHED CellPipe 7130 RG User’s Guide...
Page 319
Additionally, you can use netstat -e to display Ethernet statistics as the following example. C:\ >netstat -e Interface Statistics Received Sent Bytes 25250033 7060325 Unicast packets 38838 34744 Non-unicast packets 38227 Discards Errors Unknown protocols CellPipe 7130 RG User’s Guide...
P P E N D I X Setting Up Your Computer’s IP Address Note: Your specific CellPipe 7130 RG may not support all of the operating systems described in this appendix. See the product specifications for more information about which operating systems are supported.
Page 322
Appendix B Setting Up Your Computer’s IP Address Click Start > Control Panel. Figure 143 Windows XP: Start Menu In the Control Panel, click the Network Connections icon. Figure 144 Windows XP: Control Panel CellPipe 7130 RG User’s Guide...
Page 323
Right-click Local Area Connection and then select Properties. Figure 145 Windows XP: Control Panel > Network Connections > Properties On the General tab, select Internet Protocol (TCP/IP) and then click Properties. Figure 146 Windows XP: Local Area Connection Properties CellPipe 7130 RG User’s Guide...
Page 324
DNS server and an Alternate DNS server, if that information was provided. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings Click Start > All Programs > Accessories > Command Prompt. CellPipe 7130 RG User’s Guide...
This section shows screens from Windows Vista Professional. Click Start > Control Panel. Figure 148 Windows Vista: Start Menu In the Control Panel, click the Network and Internet icon. Figure 149 Windows Vista: Control Panel CellPipe 7130 RG User’s Guide...
Page 326
Right-click Local Area Connection and then select Properties. Figure 152 Windows Vista: Network and Sharing Center Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. CellPipe 7130 RG User’s Guide...
Page 327
Appendix B Setting Up Your Computer’s IP Address Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. Figure 153 Windows Vista: Local Area Connection Properties CellPipe 7130 RG User’s Guide...
Page 328
Advanced. Click OK to close the Internet Protocol (TCP/IP) Properties window. 10 Click OK to close the Local Area Connection Properties window. Verifying Settings Click Start > All Programs > Accessories > Command Prompt. CellPipe 7130 RG User’s Guide...
Page 329
This section shows screens from Windows 7 Enterprise. Click Start > Control Panel. Figure 155 Windows 7: Start Menu In the Control Panel, click View network status and tasks under the Network and Internet category. Figure 156 Windows 7: Control Panel CellPipe 7130 RG User’s Guide...
Page 330
Double click Local Area Connection and then select Properties. Figure 158 Windows 7: Local Area Connection Status Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. CellPipe 7130 RG User’s Guide...
Page 331
Appendix B Setting Up Your Computer’s IP Address Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. Figure 159 Windows 7: Local Area Connection Properties CellPipe 7130 RG User’s Guide...
Page 332
Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. CellPipe 7130 RG User’s Guide...
Page 333
Mac OS X: 10.3 and 10.4 The screens in this section are from Mac OS X 10.4 but can also apply to 10.3. Click Apple > System Preferences. Figure 162 Mac OS X 10.4: Apple Menu CellPipe 7130 RG User’s Guide...
Page 334
Figure 163 Mac OS X 10.4: System Preferences When the Network preferences pane opens, select Built-in Ethernet from the network connection type list, and then click Configure. Figure 164 Mac OS X 10.4: Network Preferences CellPipe 7130 RG User’s Guide...
Page 335
For statically assigned settings, do the following: • From the Configure IPv4 list, select Manually. • In the IP Address field, type your IP address. • In the Subnet Mask field, type your subnet mask. CellPipe 7130 RG User’s Guide...
Page 336
Click Apply Now and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network Interface from the Info tab. Figure 167 Mac OS X 10.4: Network Utility CellPipe 7130 RG User’s Guide...
Page 337
The screens in this section are from Mac OS X 10.5 but can also apply to 10.6. Click Apple > System Preferences. Figure 168 Mac OS X 10.5: Apple Menu In System Preferences, click the Network icon. Figure 169 Mac OS X 10.5: Systems Preferences CellPipe 7130 RG User’s Guide...
Page 338
From the Configure list, select Using DHCP for dynamically assigned settings. For statically assigned settings, do the following: • From the Configure list, select Manually. • In the IP Address field, enter your IP address. • In the Subnet Mask field, enter your subnet mask. CellPipe 7130 RG User’s Guide...
Page 339
Appendix B Setting Up Your Computer’s IP Address • In the Router field, enter the IP address of your CellPipe 7130 RG. Figure 171 Mac OS X 10.5: Network Preferences > Ethernet Click Apply and close the window. CellPipe 7130 RG User’s Guide...
Page 340
The following screens use the default Ubuntu 8 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in GNOME: CellPipe 7130 RG User’s Guide...
Page 341
When the Network Settings window opens, click Unlock to open the Authenticate window. (By default, the Unlock button is greyed out until clicked.) You cannot make changes to your configuration unless you first enter your admin password. Figure 174 Ubuntu 8: Network Settings > Connections CellPipe 7130 RG User’s Guide...
Page 342
Authenticate button. Figure 175 Ubuntu 8: Administrator Account Authentication In the Network Settings window, select the connection that you want to configure, then click Properties. Figure 176 Ubuntu 8: Network Settings > Connections CellPipe 7130 RG User’s Guide...
Page 343
• In the Configuration list, select Static IP address if you have a static IP address. Fill in the IP address, Subnet mask, and Gateway address fields. Click OK to save the changes and close the Properties dialog box and return to the Network Settings screen. CellPipe 7130 RG User’s Guide...
Page 344
Figure 178 Ubuntu 8: Network Settings > DNS Click the Close button to apply the changes. Verifying Settings Check your TCP/IP properties by clicking System > Administration > Network Tools, and then selecting the appropriate Network device from the Devices CellPipe 7130 RG User’s Guide...
Page 345
The following screens use the default openSUSE 10.3 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in the KDE: CellPipe 7130 RG User’s Guide...
Page 346
Figure 180 openSUSE 10.3: K Menu > Computer Menu When the Run as Root - KDE su dialog opens, enter the admin password and click OK. Figure 181 openSUSE 10.3: K Menu > Computer Menu CellPipe 7130 RG User’s Guide...
Page 347
Figure 182 openSUSE 10.3: YaST Control Center When the Network Settings window opens, click the Overview tab, select the appropriate connection Name from the list, and then click the Configure button. Figure 183 openSUSE 10.3: Network Settings CellPipe 7130 RG User’s Guide...
Page 348
Select Statically assigned IP Address if you have a static IP address. Fill in the IP address, Subnet mask, and Hostname fields. Click Next to save the changes and close the Network Card Setup window. CellPipe 7130 RG User’s Guide...
Page 349
Click Finish to save your settings and close the window. Verifying Settings Click the KNetwork Manager icon on the Task bar to check your TCP/IP properties. From the Options sub-menu, select Show Connection Information. Figure 186 openSUSE 10.3: KNetwork Manager CellPipe 7130 RG User’s Guide...
Page 350
Appendix B Setting Up Your Computer’s IP Address When the Connection Status - KNetwork Manager window opens, click the Statistics tab to see if your connection is working properly. Figure 187 openSUSE: Connection Status - KNetwork Manager CellPipe 7130 RG User’s Guide...
In Internet Explorer, select Tools, Pop-up Blocker and then select Turn Off Pop-up Blocker. Figure 188 Pop-up Blocker You can also check if pop-up blocking is disabled in the Pop-up Blocker section in the Privacy tab. CellPipe 7130 RG User’s Guide...
Page 352
Click Apply to save this setting. Enable Pop-up Blockers with Exceptions Alternatively, if you only want to allow pop-up windows from your device, see the following steps. In Internet Explorer, select Tools, Internet Options and then the Privacy tab. CellPipe 7130 RG User’s Guide...
Page 353
Select Settings…to open the Pop-up Blocker Settings screen. Figure 190 Internet Options: Privacy Type the IP address of your device (the web page that you do not want to have blocked) with the prefix “http://”. For example, http://192.168.1.1. CellPipe 7130 RG User’s Guide...
Page 354
Figure 191 Pop-up Blocker Settings Click Close to return to the Privacy screen. Click Apply to save this setting. JavaScripts If pages of the web configurator do not display properly in Internet Explorer, check that JavaScripts are allowed. CellPipe 7130 RG User’s Guide...
Page 355
Figure 192 Internet Options: Security Click the Custom Level... button. Scroll down to Scripting. Under Active scripting make sure that Enable is selected (the default). Under Scripting of Java applets make sure that Enable is selected (the default). CellPipe 7130 RG User’s Guide...
Java Permissions From Internet Explorer, click Tools, Internet Options and then the Security tab. Click the Custom Level... button. Scroll down to Microsoft VM. Under Java permissions make sure that a safety level is selected. CellPipe 7130 RG User’s Guide...
Page 357
Click OK to close the window. Figure 194 Security Settings - Java JAVA (Sun) From Internet Explorer, click Tools, Internet Options and then the Advanced tab. Make sure that Use Java 2 for <applet> under Java (Sun) is selected. CellPipe 7130 RG User’s Guide...
Page 358
Mozilla Firefox 2.0 screens are used here. Screens for other versions may vary. You can enable Java, Javascripts and pop-ups in one screen. Click Tools, then click Options in the screen that appears. Figure 196 Mozilla Firefox: Tools > Options CellPipe 7130 RG User’s Guide...
Page 359
Appendix C Pop-up Windows, JavaScripts and Java Permissions Click Content.to show the screen below. Select the check boxes as shown in the following screen. Figure 197 Mozilla Firefox Content Security CellPipe 7130 RG User’s Guide...
Page 360
Appendix C Pop-up Windows, JavaScripts and Java Permissions CellPipe 7130 RG User’s Guide...
192.168.1.1). Each of these four parts is known as an octet. An octet is an eight-digit binary number (for example 11000000, which is 192 in decimal notation). Therefore, each octet has a possible range of 00000000 to 11111111 in binary, or 0 to 255 in decimal. CellPipe 7130 RG User’s Guide...
Page 364
In this example, the company network address is 192.168.1.0. The first three octets of the address (192.168.1) are the network number, and the remaining octet is the host ID, allowing a maximum of 2 – 2 or 254 possible hosts. CellPipe 7130 RG User’s Guide...
Page 365
The “borrowed” host ID bit can have a value of either 0 or 1, allowing two subnets; 192.168.1.0 /25 and 192.168.1.128 /25. The following figure shows the company network after subnetting. There are now two sub-networks, A and B. Figure 200 Subnetting Example: After Subnetting CellPipe 7130 RG User’s Guide...
Page 366
LAST OCTET BIT IP/SUBNET MASK NETWORK NUMBER VALUE IP Address 192.168.1. IP Address (Binary) 11000000.10101000.00000001. 01000000 Subnet Mask (Binary) 11111111.11111111.11111111. 11000000 Subnet Address: Lowest Host ID: 192.168.1.65 192.168.1.64 Broadcast Address: Highest Host ID: 192.168.1.126 192.168.1.127 CellPipe 7130 RG User’s Guide...
Page 367
Similarly, use a 27-bit mask to create eight subnets (000, 001, 010, 011, 100, 101, 110 and 111). The following table shows IP address last octet values for each subnet. Table 113 Eight Subnets SUBNET LAST BROADCAST SUBNET FIRST ADDRESS ADDRESS ADDRESS ADDRESS CellPipe 7130 RG User’s Guide...
Page 368
8192 255.255.255.252 (/30) 16384 255.255.255.254 (/31) 32768 Configuring IP Addresses Where you obtain your network number depends on your particular situation. If the ISP or your network administrator assigns you a block of registered IP CellPipe 7130 RG User’s Guide...
Page 369
Once you have decided on the network number, pick an IP address for your CellPipe 7130 RG that is easy to remember (for instance, 192.168.1.1) but make sure that no other device on your network is using that IP address.
Page 370
Since a router connects different networks, it must have interfaces using different network numbers. For example, if a router is set between a LAN and the Internet (WAN), the router’s LAN and WAN addresses must be on different subnets. In the CellPipe 7130 RG User’s Guide...
Page 371
LAN port both use 192.168.1.1 as the IP address. The computer cannot access the Internet. This problem can be solved by assigning a different IP address to the computer or the router’s LAN port. Figure 203 Conflicting Computer and Router IP Addresses Example CellPipe 7130 RG User’s Guide...
Page 372
Appendix D IP Addresses and Subnetting CellPipe 7130 RG User’s Guide...
P P E N D I X Wireless LANs Note: Your specific CellPipe 7130 RG may not support all of the wireless security types described in this appendix. See the product specifications for more information about which wireless security types are supported.
Page 374
This wired connection between APs is called a Distribution System (DS). This type of wireless LAN topology is called an Infrastructure WLAN. The Access Points not only provide communication with the wired network but also mediate wireless network traffic in the immediate neighborhood. CellPipe 7130 RG User’s Guide...
Page 375
AP is using channel 1, then you need to select a channel between 6 or 11. RTS/CTS A hidden node occurs when two stations are within range of the same access point, but are not within range of each other. The following figure illustrates a CellPipe 7130 RG User’s Guide...
Page 376
RTS (Request To Send)/CTS (Clear to Send) handshake will never occur as data frames will be fragmented before they reach RTS/CTS size. Note: Enabling the RTS Threshold causes redundant network overhead that could negatively affect the throughput performance instead of providing a remedy. CellPipe 7130 RG User’s Guide...
Use the dynamic setting to automatically use short preamble when all wireless devices on the network support it, otherwise the CellPipe 7130 RG uses long preamble. Note: The wireless devices MUST use the same preamble mode in order to communicate.
Page 378
Wi-Fi Protected Access (WPA) Most Secure WPA2 Note: You must enable the same wireless security settings on the CellPipe 7130 RG and on all wireless clients that you want to associate with it. IEEE 802.1x In June 2001, the IEEE 802.1x standard was designed to extend the features of IEEE 802.11 to support extended authentication as well as providing additional...
Page 379
Sent by a RADIUS server allowing access. • Access-Challenge Sent by a RADIUS server requesting more information in order to allow access. The access point sends a proper response from the user and then sends another Access-Request message. CellPipe 7130 RG User’s Guide...
Page 380
Thus someone other than the authentication server may access the password file. In addition, it is possible to impersonate an authentication server as MD5 authentication method does not perform mutual authentication. Finally, MD5 CellPipe 7130 RG User’s Guide...
If this feature is enabled, it is not necessary to configure a default encryption key in the wireless security configuration screen. You may still configure and store keys, but they will not be used while dynamic WEP is enabled. CellPipe 7130 RG User’s Guide...
Select WEP only when the AP and/or wireless clients do not support WPA or WPA2. WEP is less secure than WPA or WPA2. Encryption WPA improves data encryption by using Temporal Key Integrity Protocol (TKIP), Message Integrity Check (MIC) and IEEE 802.1x. WPA2 also uses TKIP when CellPipe 7130 RG User’s Guide...
Page 383
(CCMP 4-way handshake) and shortens the time required to connect to a network. Other WPA2 authentication features that are different from WPA include key caching and pre- CellPipe 7130 RG User’s Guide...
Page 384
The RADIUS server then checks the user's identification against its database and grants or denies network access accordingly. A 256-bit Pairwise Master Key (PMK) is derived from the authentication process by the RADIUS server and the client. CellPipe 7130 RG User’s Guide...
Page 385
The AP and wireless clients generate a common PMK (Pairwise Master Key). The key itself is not sent over the network, but is derived from the PSK and the SSID. CellPipe 7130 RG User’s Guide...
Types of Antennas for WLAN There are two types of antennas used for wireless LAN applications. CellPipe 7130 RG User’s Guide...
Page 388
For a single AP application, place omni-directional antennas as close to the center of the coverage area as possible. For directional antennas, point the antenna in the direction of the desired coverage area. CellPipe 7130 RG User’s Guide...
A popular videoconferencing solution from White Pines Software. 24032 TCP/UDP Domain Name Server, a service that matches web names to IP numbers. User-Defined The IPSEC ESP (Encapsulation (IPSEC_TUNNEL) Security Protocol) tunneling protocol uses this service. CellPipe 7130 RG User’s Guide...
Page 390
ICMP echo requests to test whether or not a remote host is reachable. POP3 Post Office Protocol version 3 lets a client computer get e-mail from a POP3 server through a temporary connection (TCP/IP or other). CellPipe 7130 RG User’s Guide...
Page 391
TELNET Telnet is the login and terminal emulation protocol common on the Internet and in UNIX environments. It operates over TCP/IP networks. Its primary function is to allow users to log into remote host systems. CellPipe 7130 RG User’s Guide...
Page 392
PROTOCOL PORT(S) DESCRIPTION TFTP Trivial File Transfer Protocol is an Internet file transfer protocol similar to FTP, but uses the UDP (User Datagram Protocol) rather than TCP (Transmission Control Protocol). VDOLIVE 7000 Another videoconferencing solution. CellPipe 7130 RG User’s Guide...
Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CellPipe 7130 RG User’s Guide...
Page 394
IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. 注意 ! 依據 低功率電波輻射性電機管理辦法 CellPipe 7130 RG User’s Guide...
Page 395
This device has been designed for the WLAN 2.4 GHz network throughout the EC region and Switzerland, with restrictions in France. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CellPipe 7130 RG User’s Guide...
Page 396
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 397
Appendix G Legal Information CellPipe 7130 RG User’s Guide...
Auto Configuration Server, see ACS channel backup interference Basic Service Set, See BSS channel ID blinking LEDs CIFS broadcast CIFS (Common Internet File System) 183, 188, command parameters command syntax CellPipe 7130 RG User’s Guide...
Page 399
Domain Name System. See DNS. DS field DS, dee differentiated services DSCP hidden node DSL interface host dynamic DNS host name Dynamic Host Configuration Protocol. See DHCP. HTTP 178, 191, 192 dynamic WEP key exchange HTTP (Hypertext Transfer Protocol) CellPipe 7130 RG User’s Guide...
Page 400
DLNA policies enable IP multicasting memory usage IP pool IP pool setup Message Integrity Check (MIC) ipconfig MTU (Multi-Tenant Unit) ipconfig, release multicast 129, 132 ipconfig, renew multiplexing CellPipe 7130 RG User’s Guide...
Page 401
Operation, Administration and Maintenance, see OAM RADIUS message types messages shared secret key related documentation Packet Transfer Mode remote management Pairwise Master Key (PMK) TR-069 383, 385 Peak Cell Rate (PCR) Remote Procedure Calls, see RPCs 109, 125 CellPipe 7130 RG User’s Guide...
Page 402
USB features static route 209, 213, 217 USB printer static VLAN user levels status indicators admin storage humidity installer storage temperature priviledged subnet root subnet mask subscriber 135, 362 subnetting tech Sustain Cell Rate (SCR) CellPipe 7130 RG User’s Guide...
Page 403
VLAN ID VLAN Identifier See VID status VLAN tag WAN (Wide Area Network) WAN interface WAN statistics Web Configurator 83, 84 WEP encryption Wi-Fi Protected Access Windows Command Prompt command parameters ipconfig netstat CellPipe 7130 RG User’s Guide...