13.1 Overview
By default, the four LAN interfaces on the Zyxel Device are in the same group and can communicate
with each other. Creating a new interface will create a new LAN bridge interface (subnet) (for example,
192.168.2.0/24) that acts as a dependent LAN network, and is a different subnet from default LAN
subnet (192.168.1.0/24).
13.2 What You Can Do
• Use the Interface Group screen to create a new interface group
13.3 Interface Group Screen
You can manually add a LAN/WLAN interface to a new group.
Use the DHCP screen to configure the private IP addresses the DHCP server on the Zyxel Device assigns
to the clients in the default and/or user-defined groups. See
Use the Interface Group screen to create a new interface group, which is a new LAN bridge interface
(subnet). Click Network > Interface Group to open the following screen.
Figure 69 Network > Interface Group
The following table describes the fields in this screen.
Table 46 Network > Interface Group
LABEL
Add
Name
LAN Interface
Interface Group
DESCRIPTION
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the interface group.
LTE3301-M209 User's Guide
C
H A P T E R
Chapter 9 on page 82
101
(Section 13.3 on page
101).
for more information.
13