Client List - ZyXEL Communications CellPipe 7130 RG User Manual

4.2.5 Client List

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the CellPipe 7130 RG as a DHCP server or disable it. When configured as
a server, the CellPipe 7130 RG provides the TCP/IP configuration for the clients. If
DHCP service is disabled, you must have another DHCP server on your LAN, or
else the computer must be manually configured.
Click Status > Client List to open the following screen. The read-only DHCP table
shows current DHCP client information (including IP Address, Host Name and
MAC Address) of all network clients using the CellPipe 7130 RG's DHCP server.
Figure 15 Status > Client List
The following table describes the labels in this screen.
Table 13 Status > Client List
LABEL
Host Name
MAC Address
IP Address
CellPipe 7130 RG User's Guide
DESCRIPTION
This indicates the computer host name.
Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
This indicates the MAC address of the client computer.
This indicates the IP address assigned to this client computer.
Chapter 4 Status Screens
99