Sim Configuration Screen - ZyXEL Communications LTE7461-M602 User Manual

Table 7 Network Setting > Broadband > Cellular WAN (continued)
LABEL
Username
Password
Authentication
Type
PDP Type
Apply
Cancel
5.3 The Cellular SIM Configuration Screen
Enter a PIN for your SIM card to prevent others from using it.
Entering the wrong PIN code 3 consecutive times locks the SIM card
after which you need a PUK (Personal Unlocking Key) from the service
provider to unlock it.
Click Network Setting > Broadband > Cellular SIM. The following screen opens.
Figure 19 Network Setting > Broadband > Cellular SIM
Note: The PIN is automatically saved in the Zyxel Device.
Entering the wrong PIN exceeding a set number of times will lock the SIM card.
Chapter 5 Broadband
DESCRIPTION
This field allows you to display the user name in the profile.
Type the user name (up to 31 printable ASCII characters) given to you by your service provider.
This field allows you to set the password in the profile.
Type the password (up to 31 printable ASCII characters) associated with the user name above.
Select the type of authentication method peers use to connect to the Zyxel Device in LTE
connections.
In Password Authentication Protocol (PAP) peers identify themselves with a user name and
password. In Challenge Handshake Authentication Protocol (CHAP) additionally to user name
and password the Zyxel Device sends regular challenges to make sure an intruder has not
replaced a peer. Otherwise select PAP/CHAP or None.
Select IPv4 if you want the Zyxel Device to run IPv4 (Internet Protocol version 4 addressing system)
only.
Select IPv4/IPv6 if you want the Zyxel Device to run both IPv4 and IPv6 (Internet Protocol version 4
and 6 addressing system) at the same time.
Click this to save your changes.
Click this to exit this screen without saving.
LTE7461-M602 User's Guide
36