Remote Management; Chapter 18 Remote Management; Overview; What You Can Do In This Chapter - ZyXEL Communications CellPipe 7130 RG User Manual

C
H A P T E R

18.1 Overview

This chapter explains how to configure the remote management and access
control settings on the CellPipe 7130 RG.
The CellPipe 7130 RG supports multiple remote management sessions running at
one time.
Note: Refer to
its own account information for logging into the CellPipe 7130 RG.

18.1.1 What You Can Do in this Chapter

• The TR-069 screen lets you configure the CellPipe 7130 RG's TR-069 auto-
configuration settings
• The TR-064 screen lets you enable management via TR-064 on the CellPipe
7130 RG (Section 18.3 on page
• The Service Control screens let you configure through which interface(s) users
can use which service(s) to manage the CellPipe 7130 RG
242).
• The IP Address screens let you configure from which IP address(es) users can
use a service to manage the CellPipe 7130 RG

18.2 The TR-069 Screen

TR-069 defines how Customer Premise Equipment (CPE), for example your
CellPipe 7130 RG, can be managed over the WAN by an Auto Configuration Server
(ACS). TR-069 is based on sending Remote Procedure Calls (RPCs) between an
ACS and a client device. RPCs are sent in Extensible Markup Language (XML)
format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the CellPipe 7130 RG, modify
settings, perform firmware upgrades as well as monitor and diagnose the CellPipe
CellPipe 7130 RG User's Guide

Remote Management

Section 3.2 on page 83
(Section 18.3 on page
241).
for user level information. Each user level has
241).
(Section 18.4 on page
(Section 18.5 on page
18
243).
239