Configuring Multiple Wan Connections - ZyXEL Communications CellPipe 7130 RG User Manual

Chapter 2 Tutorials

2.5.1 Configuring Multiple WAN Connections

Follow the steps below to configure two VDSL connections.
Make sure you set the WAN Link Mode to DSL in the Network > WAN > Mode
1
screen.
By default, there is a PTM layer-2 interface in VLAN MUX mode configured already
2
on the CellPipe 7130 RG.
DSL Connection for Internet Access
Go to the WAN > Services screen. Click Add.
1
54
CellPipe 7130 RG User's Guide