Table of Contents
Advertisement
Chapter 24 Tools
If the upload was not successful, the following screen will appear. Click Tools >
Configuration to go back to the Configuration screen.
Figure 135 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the CellPipe 7130 RG to its factory defaults. The following warning screen
appears.
Figure 136 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your CellPipe 7130 RG. Refer to
information on the RESET button.
24.4 The Restart Screen
System restart allows you to reboot the CellPipe 7130 RG without turning the
power off.
280
Section 1.7 on page 28
CellPipe 7130 RG User's Guide
for more
Advertisement
Table of Contents
Troubleshooting
