The Service Control Screen - ZyXEL Communications CellPipe 7130 RG User Manual

Chapter 18 Remote Management

18.4 The Service Control Screen

Click Advanced > Remote MGMT > Service Control to open the following
screen. Use this screen to decide what services you may use to access which
CellPipe 7130 RG interface.
Figure 98 Service Control
The following table describes the fields in this screen.
Table 80 Access Control: Services
LABEL
Service Control
#
Services
LAN
WAN
Apply
242
DESCRIPTION
Select Enable to turn on service control. Otherwise, select Disable.
This is the index number of the entry.
This is the service you may use to access the CellPipe 7130 RG.
Select the Enable check box for the corresponding services that you
want to allow access to the CellPipe 7130 RG from the LAN.
Select the Enable check box for the corresponding services that you
want to allow access to the CellPipe 7130 RG from the WAN.
Click this button to save your changes back to the CellPipe 7130 RG.
CellPipe 7130 RG User's Guide