ZyXEL Communications CellPipe 7130 RG User Manual page 27

With vdsl2/adsl broadband access
Table of Contents

Advertisement

Table 1 LED Descriptions
LED
DSL
WPS
WLAN
HPNA
USB
GigE
ETHERNET
1-4
Power
Refer to the Quick Start Guide for information on hardware connections.
CellPipe 7130 RG User's Guide
COLO
STATUS DESCRIPTION
R
Off
There is no Internet connection or the gateway is in
bridged mode.
Green
On
The DSL line is up.
Blinking
The CellPipe 7130 RG is initializing the DSL line.
Off
The DSL line is down.
Green
On
The wireless connection is successful. The light turns on
for about 3 seconds before turning off.
Blinking
The CellPipe 7130 RG is connecting with other wireless
clients using WPS.
Off
The WPS feature is not activated or has an error.
Green
On
The wireless network is activated and is operating in IEEE
802.11b/g mode.
Blinking
The CellPipe 7130 RG is communicating with other
wireless clients.
Off
The wireless network is not activated.
Green
On
The CellPipe 7130 RG is connected to an HPNA-equipped
device through the coaxial cable.
Blinking
Data is transmitting over the HPNA cable.
Off
No HPNA device is connected.
Green
On
The CellPipe 7130 RG recognizes a USB connection.
Blinking
The CellPipe 7130 RG is sending/receiving data to /from
the USB device connected to it.
Off
The CellPipe 7130 RG does not detect a USB connection.
Green
On
The Giga Ethernet connection is working.
Blinking
The CellPipe 7130 RG is sending or receiving data to/
from the Giga Ethernet link.
Off
There is no Giga Ethernet link.
Green
On
The CellPipe 7130 RG has a successful 100 Mbps
Ethernet connection with a device on the Local Area
Network (LAN).
Blinking
The CellPipe 7130 RG is sending or receiving data to/
from the LAN at 100 Mbps.
Off
The CellPipe 7130 RG does not have an Ethernet
connection with the LAN.
Green
On
The CellPipe 7130 RG is receiving power and ready for
use.
Blinking
The CellPipe 7130 RG is self-testing.
Red
On
The CellPipe 7130 RG detected an error while self-
testing, or there is a device malfunction.
Off
The CellPipe 7130 RG is not receiving power.
Blinking
Firmware upgrade is in progress.
Chapter 1 Introducing the CellPipe 7130 RG
27

Advertisement

Table of Contents
loading

Table of Contents